A Short Review on Polymer Nanocomposites for Enameled Wires: Possibilities and Perspectives

Authors

  • M. Danikas Department of Electrical & Computer Engineering, Democritus University of Thrace, Greece
  • S. Morsalin University of New South Wales, School of Electrical Engineering and Telecommunications, Sydney, Australia

Abstract

Polymer nanocomposites constitute a new generation of insulating materials, capable of offering better electrical, thermal and mechanical properties. Past research indicated that such materials may replace conventional polymers for a variety of industrial high voltage applications. In the present paper, polymer nanocomposites are investigated regarding the insulation of enameled wires. Possible nanocomposite candidates are discussed.

Keywords:

enameled wires, nanocomposites, nanoparticles, partial discharges, charges, voltage rise time, insulation deterioration

Downloads

Download data is not yet available.

References

S. V. Kjaer, J. Holboll, “System for detection and analysis of partial dischargesunder transient voltage application”, Proceedings of Nordic Insulation Symposium, Trondheim, Norway, pp. 75-78, June 9-12, 2013

B. de Vivo, P. Lamberti, R. Raimo, V. Tucci, L. Guadagno, L. Vertuccio, V. Vittoria, “Evaluation of the electrical properties of epoxy-based nanocompositesmotor insulation”, Proceedings of the 8th International Symposium onDiagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED 2011), Bologna, Italy, pp. 426-430, September 5-8, 2011 DOI: https://doi.org/10.1109/DEMPED.2011.6063658

T. J. Lewis, “Nanometric dielectrics”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 1, No. 5, pp. 812-825, 1994 DOI: https://doi.org/10.1109/94.326653

T. Tanaka, “Dielectric nanocomposites with insulating properties”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 12, pp. 914-928, 2005 DOI: https://doi.org/10.1109/TDEI.2005.1522186

J. Keith Nelson (editor), Dielectric Polymer Nanocomposites, Springer, Heidelberg, Germany, 2010 DOI: https://doi.org/10.1007/978-1-4419-1591-7

D. Kind, D. Kaerner, High-Voltage Insulation Technology, Vieweg, Braunschweig, Germany, 1985 DOI: https://doi.org/10.1007/978-3-663-14090-0

J. Heighes, “Production and applications of solid insulants”, pp. 130-146, in Electrical Insulation, edited by A. Bradwell, Peter Peregrinus, London, UK, 1983

http://www.mwswire.com/pdf_files/mws_tech_book/page2_3.pdf

H. Wang, Alterung von Isoliersystemen elektrischer Maschinen imReversierbetrieb, Ph. D. Thesis, Universitaet Gesamthochschule Essen, Fachbereich Maschinenwesen, 1998

E. L. Brancato, L. M. Johnson, F. J. Campbell, H. P. Walker, Reliability Prediction Studies on Electrical Insulation: Navy Summary Report, Naval Research Laboratory, NRL Report 8095, Washington, D. C., USA, 1977

E. L. Brancato, “Estimation of lifetime expectancies of motors”, IEEE Electrical Insulation Magazine, Vol. 8, No. 3, pp. 5-13, 1992 DOI: https://doi.org/10.1109/57.139066

E. O. Forster, R. Bartnikas, E. Brancato, F. Campbell, T. Dakin, G. Link, T. Orbeck, C. Reed, E. Sacher, “Research needs to assess the long-term performance of electrical insulating materials and systems”, Task Force on Aging of Electrical Insulation, National Academy of Sciences, Washington, D. C., USA, 1977 DOI: https://doi.org/10.1109/CEIDP.1976.7733906

K. N. Mathes, “Thermal aging of electrical insulation – Technology and standardization”, Conference Record of the 1985 International Conference onProperties and Applications of Dielectric Materials, Xi’an, China, pp. 299-302, June 24-29, 1985

W. Weizheng, “A brief review on development and application of insulatingmaterials in China”, Conference Record of the 1985 International Conference on Properties and Applications of Dielectric Materials, Xi’an, China, pp. 1-8, June 24-29, 1985

L. J. Payette, “Solderable wire enamel”, IEEE Electrical Insulation Magazine,Vol. 6, No. 5, pp. 8-12, 1990 DOI: https://doi.org/10.1109/57.63077

A. J. Battisti, C. Lin, “New developments in solventless polyester varnishes”, IEEE Electrical Insulation Magazine, Vol. 7, No. 5, pp. 21-26, 1991 DOI: https://doi.org/10.1109/57.93159

M. G. Danikas, R. Sarathi, “Interfaces in high-voltage engineering: A mostimportant question for conventional solid insulating materials as well as for nanocomposite polymers”, Funktechnikplus#Journal, Vol. 1, No. 4, pp. 7-31, 2014

J. K. Nelson, “The promise of dielectric nanocomposites”, Conference Record of 2006 IEEE International Symposium on Electrical Insulation, Toronto, Canada, pp. 452-457, June 11-14, 2006

G. Melissinos, M. G. Danikas, “On polymers nanocomposites: Electrical treeing, breakdown models and related simulations”, Engineering, Technology &Applied Science Research, Vol. 8, No. 2, pp. 2627-2632, 2018 DOI: https://doi.org/10.48084/etasr.1726

G. Melissinos, Breakdown models of polymer nanocomposites, Diploma Thesis, Democritus University of Thrace, Department of Electrical and Computer Engineering, Xanthi, Greece, 2016 (in Greek)

T. Tanaka, “A novel concept for electronic transport in nanoscale spaces formedby islandic multi-cored nanoparticles”, Proceedings of 2016 IEEE InternationalConference on Dielectrics (ICD), Montpellier, France, July 3-7, 2016 DOI: https://doi.org/10.1109/ICD.2016.7547533

Y. Nyanteh, L. Graber, C. Edrington, S. Srivastava, D. Cartes, “Overview ofsimulation models for partial discharge and electrical treeing to determine feasibilityfor estimation of remaining life of machine insulation systems”, Proceedings of 2011 Electrical Insulation Conference, Annapolis, Maryland, USA, pp. 327-332, June 5-8, 2011 DOI: https://doi.org/10.1109/EIC.2011.5996172

M. G. Danikas, T. Tanaka, “Nanocomposites – A review of electrical treeing and breakdown”, IEEE Electrical Insulation Magazine, Vol. 25, No. 4, pp. 19-25, 2009 DOI: https://doi.org/10.1109/MEI.2009.5191413

T. Tanaka, T. Imai, “Advances in nanodielectric materials over the past 50 years”, IEEE Electrical Insulation Magazine, Vol. 29, No. 1, pp. 10-23, 2013

E. David, M. Frechette, “Polymer nanocomposites – Major conclusions and achievements reached so far”, IEEE Electrical Insulation Magazine, Vol. 29, No. 6,pp. 29-36, 2013 DOI: https://doi.org/10.1109/MEI.2013.6648751

E. A. Cherney, “Nanodielectrics applications – Today and tomorrow”, IEEE Electrical Insulation Magazine, Vol. 29, No. 6, pp. 59-65, 2013 DOI: https://doi.org/10.1109/MEI.2013.6648754

M. G. Danikas, A. Bairaktari, R. Sarathi, A. Basri Bin Abd Ghani, “A review of twonanocomposite insulating materials models: Lewis’ contribution in the developmentof the models, their differences their similarities and future challenges”, Engineering, Technology & Applied Research, Vol. 4, No. 3, pp. 636-643, 2014 DOI: https://doi.org/10.48084/etasr.441

M. C. Hawfield, “The origins of the magnet wire industry in America”, IEEE Electrical Insulation Magazine, Vol. 15, No. 3, pp. 5-8, 1999 DOI: https://doi.org/10.1109/57.768530

E. Kuffel, W. S. Zaengl, J. Kuffel, High Voltage Engineering: Fundamentals, Newness, Oxford, UK, 2000

T. J. A. Hammarstroem, T. Bengtsson, J. Blennow, S. M. Gubanski, “Partial discharges in motor wires at PWM voltages of different smoothness”, Proceedingsof the International Symposium on Electrical Insulating Materials, Niigara City, Japan, June 1-5, 2014 DOI: https://doi.org/10.1109/ISEIM.2014.6870749

S. Li, S. Yu, Y. Feng, “Progress in and prospects for electrical insulatingmaterials”, High Voltage, Vol. 1, No. 3, pp. 122-129, 2016 DOI: https://doi.org/10.1049/hve.2016.0034

I. Plesa, P. V. Notingher, S. Schloegl, C. Sumereder, M. Muhr, “Properties of polymer composites used in high-voltage applications”, Polymers, Vol. 8, pp. 1-63, 2016 DOI: https://doi.org/10.3390/polym8050173

F. Guastavino, C. Gianoglio,. Torello, M. Ferraris, W. Gianelli, “Behaviour of conventional and nanofilled impregnation resins when subjected to PD activity”, Proceedings of 2018 2nd IEEE International Conference on Dielectrics (ICD 2018), Budapest, Hungary, pp. 737-739, July 1-5, 2018 DOI: https://doi.org/10.1109/ICD.2018.8468410

R. E. Hebner, “Electrical insulation challenges for rotating machines used onfuture electric ships”, Proceedings of 2007 Electrical Insulation Conference andElectrical manufacturing Expo, Nashville, TN, USA, pp. 236-239, October 22-24, 2007 DOI: https://doi.org/10.1109/EEIC.2007.4562627

V. Mentlik, J. Pihera, O. Taborik, P. Trnka, “The influence of pulse stress on main-wall insulation of electrical rotating machines”, Zeszyty Problemowe, Vol. 77, pp. 43-46, 2007

M. Birle, C. Leu, S. Bauer, “Design and application of a higher frequency high-voltage generator”, Proceedings of XVII International Symposium on HighVoltage Engineering, Hannover, Germany, August 22-26 , 2011

P. Mraz, V. Kindl, K. Hruska, “Influence of low-conductive coating on insulationsystem of rotary electric machine”, Journal of Electrical Engineering, Vol. 63, No. 3, pp. 180-185, 2012 DOI: https://doi.org/10.2478/v10187-012-0026-6

D. Edison Selvaraj, S. Usa, C. Pugazhendhi Sugumaran, “Comparative analysis ofdielectrtic properties of enamel filled with various nanofillers such as ZrO2, Al2O3, CNT and ZnO”, International Journal of Science and Engineering Applications, Vol. 1, No. 1, pp. 51-55, 2012 DOI: https://doi.org/10.7753/IJSEA0101.1008

M. Mesaki, Y. Tatematsu, H. Goda, “Hybrid composites of polyamide-imide andsilica applied to wire insulation”, Furukawa Review, No. 22, pp. 1-4, 2002

http://www.hitachi-cable.com/products/news/20110512.html

X. Ma, S.-J. Kim, "Synthesis and characterization of silica/polyamide-imide composite film for enamled wire", available at: http://cdn.intechopen.com/pdfs/30953/InTech-Synthesis_and_characteris

ation_of_silica_polyamide_imide_composite_film_for_enamel_wire.pdf

X. Ma, N.-H. Lee, H. -J. Oh, J. -S. Hwang, S. -J. Kim, “Preparation and characterization of silica/polyamide-imide nanocomposite thin films”, Nanoscale Research Letters, Vol. 5, pp. 1846-1851, 2010 DOI: https://doi.org/10.1007/s11671-010-9726-7

B. Gornicka, K. Prociov, “Insulating system of inverter-driven motors based on nanocomposites”, Materials and Manufacturing Processes, Vol. 24, pp. 1202-1206, 2009 DOI: https://doi.org/10.1080/10426910902979017

R. Duckworth, T. Aytug, M. Parans Paranthaman, K. Leonard, G. Polyzos, I. Sauers, “Radiation resistant electrical insulation materials for nuclear reactorsusing novel nanocomposite dielectrics”, available at: https://www.energy.gov/sites/prod/files/2013/09/f2/8-NEET_WebinarD

uckworth.pdf

L. S. Schadler, J. K. Nelson, C. Calabrese, A. Travelpiece, D. L. Schweickart, “High temperature breakdown strength and voltage endurance characterizationof nanofilled polyamideimide”, IEEE Transactions on Dielectrics and ElectricalInsulation, Vol. 19, No. 6, pp. 2090-2101, 2012 DOI: https://doi.org/10.1109/TDEI.2012.6396969

C. Pazhanimuthu, “Investigation of dielectric and thermal properties on nanodielectric materials in electrical applications”, International Journal of Engineering and Innovative Technology, Vol. 2, No. 2, pp. 62-67, 2012

H. Kikuchi, H. Hanawa, Y. Honda, “Development of polyamide-imide/silicananocomposite enameled wire”, Electronics and Communications in Japan, Vol. 96, No. 6, pp. 41-48, 2013 DOI: https://doi.org/10.1002/ecj.11456

D. Muto, M. Oya, T. Aoi, T. Ueno, “A study on partial discharge phenomena of winding wires”, Furukawa Review, No. 45, pp. 13-21, 2014

S. Grzybowski, A. Mani, C. D. Taylor, “Partial discharge patterns of magnet wire samples under voltage stresses”, 2005 Annual Report of Conference on Electrical Insulation and Dielectric Phenomena, Nashville, USA, pp. 422-425, October 16-19, 2005

K. Inuzuka, H. Inano, N. Hayakawa, T. Hirose, M. Hamaguchi, H. Okubo, “Partial discharge characteristics of nanocomposite enameled wire for inverter-fed motor”, 2006 Annual Report of Conference on Electrical Insulation andDielectric Phenomena, Kansas City, USA, pp. 594-597, October 15-18, 2006 DOI: https://doi.org/10.1109/CEIDP.2006.312002

C. Mayoux, Contribution a l’ etude de l’ action, sur du polyethylene, de differentes formes d’ energie presents dans les decharges partielles, PhD Thesis, Universite Paul Sabatier, 1972

W. A. Izzati, Y. Z. Arief, Z. Adzis, M. Shafanizam, “Partial discharge characteristics of polymer nanocomposite materials in electrical insulation: A review of sample preparation techniques, analysis methods, potential applications, and future trends”, The Scientific World Journal, Art. No. 735070, pp. 1-14 pages, 2014 DOI: https://doi.org/10.1155/2014/735070

A. Krivda, J. Kindersberger, T. Tanaka, A. Vaughan, M. Frechette, S. Pelissou, J. Castellon, Y. Tanaka, D. Fabiani, G. -C. Montanari, L. E. Schmidt, R. Gorur, G. Iyer, P. Morshuis, T. Andritsch, S. Gubanski, J. Seiler, J. Anglhuber, “Characterization of epoxy microcomposite and nanocomposite materials forpower engineering applications”, IEEE Electrical Insulation Magazine, Vol. 28, No. 2, pp. 38-51, 2012 DOI: https://doi.org/10.1109/MEI.2012.6159180

B. Gornicka, L. Gorecki, K. Gryzlo, D. Kaczmarek, D. Wojcieszak, “Evaluation of polyesterimide nanocomposites using methods of thermal analysis”, IOP Conf. Series: Materials Science and Engineering, Vol. 113, pp. 1-4, 2016 DOI: https://doi.org/10.1088/1757-899X/113/1/012012

P. Wang, G. -N. Wu, Y. Luo, G.Y. Zhu, “Effect of repetitive square voltagefrequency on partial discharge features”, Science China (Technological Sciences), Vol. 56, No. 6, pp. 1313-1321, 2013 DOI: https://doi.org/10.1007/s11431-013-5238-x

S. U. Haq, A study on insulation problems in drive fed medium voltage induction motors, Ph.D. Thesis, University of Waterloo, Waterloo, Canada, 2007

M. Kozako, N. Fuse, Y. Ohki, T. Okamoto, T. Tanaka, “Surface degradation of polyamide nanocomposites caused by partial discharge using IEC (b) electrodes”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 11,pp. 833-838, 2004 DOI: https://doi.org/10.1109/TDEI.2004.1349788

F. Guastavino, A. Ratto, “Comparison between conventional and nanofilledEnamels under different environmental conditions”, IEEE Electrical Magazine,Vol. 28, No. 4, pp. 35-41, 2012 DOI: https://doi.org/10.1109/MEI.2012.6232008

C. Reed, “Advances in polymer dielectrics over the past 50 years”, IEEE Electrical Insulation Magazine, Vol. 29, No. 4, pp. 45-51, 2013 DOI: https://doi.org/10.1109/MEI.2013.6545261

T. Tanaka, T. Imai, “Advances in nanodielectric materials over the past 50 Years”, IEEE Electrical Insulation Magazine, Vol. 29, No. 1, pp. 10-23, 2013 DOI: https://doi.org/10.1109/MEI.2013.6410535

J. Yoo, Y. Kim, S. Kwon, J. Lee, Y. -S. Seo, “Surge-resistant nanocomposite enameled wire using silica nanoparticles with binary chemical compositions onthe surface”, Journal of Nanomaterials, Art. No. 231672, pp. 1-8, 2015 DOI: https://doi.org/10.1155/2015/231672

A. T. Hoang, Electrical characterization of partial discharge resistant enamel insulation, Thesis for the Degree of Licentiate of Engineering, Chalmers University of Technology, Department of Materials and Manufacturing Technology, High Voltage Engineering, Goeteborg, Sweden, 2014

H. Kikuchi, H. Hanawa, “Inverter surge resistant enameled wire with nanocomposite insulating material”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 19, No. 1, pp. 99-106, 2012 DOI: https://doi.org/10.1109/TDEI.2012.6148507

N. Hayakawa, H. Okubo, “Lifetime characteristics of nanocomposite enameled wire under surge voltage application”, IEEE Electrical Insulation Magazine, Vol. 24, No. 2, pp. 22-27, 2008 DOI: https://doi.org/10.1109/MEI.2008.4473051

Y. Nakamura, H. Inano, N. Hayakawa, S. Hiroshima, T. Hirose, M. Hamaguchi, H. Okubo, “Lifetime characteristics of nanocomposite enameled wire under surge voltage application”, Proceedings of International Symposium on EcoTopia Science 2007 ISETS07, pp. 496-497, Japan, 2007

T. Andritsch, D. Fabiani, I. Ramirez Vazquez, “Nanodielectrics – Examples of preparation and microstructure”, IEEE Electrical Insulation Magazine, Vol. 29, No. 6, pp. 21-28, 2013 DOI: https://doi.org/10.1109/MEI.2013.6648750

A. M. Bruning, D. G. Kasture, F. G. Campbell, N. H. Turner, “Effect of cavity sub-corona current on polymer insulation life”, IEEE Transactions on Electrical Insulation, Vol. 26, No. 4, pp. 826-836, 1991 DOI: https://doi.org/10.1109/14.83709

M. G. Danikas, X. Zhao, Y. -H. Cheng, “Experimental data on epoxy resin samples: Small partialdischarges at inception voltage and some thoughts on the possibility of the existence of charging phenomena below inception voltage”, Journal of Electrical Engineering, Vol. 62, No. 5, pp. 292-296, 2011 DOI: https://doi.org/10.2478/v10187-011-0046-7

Y. Zhang, M. G. Danikas, X. Zhao, Y. Cheng, “Preliminary experimental work on nanocomposite polymers: Small partial discharges at inception voltage, the existence of possible charging mechanisms below inception voltage and the problem of definitions“, Journal of Electrical Engineering, Vol. 63, no. 2, pp.109-114, 2012 DOI: https://doi.org/10.2478/v10187-012-0016-8

D. Fabiani, G. -C. Montanari, L. A. Dissado, C. Laurent, G. Teyssedre, “Fast and slow charge packets in polymeric materials under DC stress”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 16, No. 1, pp.241-250, 2009 DOI: https://doi.org/10.1109/TDEI.2009.4784573

N. S. Rao, K. Elanseralathan, “Influence of square waveform on life of twisted pairs due to power electronic converters”, The Journal of CPRI, Vol. 13, No. 1, pp. 135-140, 2017

D. Pitsa, M. G. Danikas, “Interfaces features in polymer nanocomposites: A review of proposed models”, NANO: Brief Reports and Reviews, Nol. 6, No. 6, pp. 497-508, 2011 DOI: https://doi.org/10.1142/S1793292011002949

Downloads

How to Cite

[1]
Danikas, M. and Morsalin, S. 2019. A Short Review on Polymer Nanocomposites for Enameled Wires: Possibilities and Perspectives. Engineering, Technology & Applied Science Research. 9, 3 (Jun. 2019), 4079–4084. DOI:https://doi.org/10.48084/etasr.2678.

Metrics

Abstract Views: 1176
PDF Downloads: 677

Metrics Information

Most read articles by the same author(s)

1 2 3 > >>