Using the Schleibinger Test System to Study the Restrained Drying Shrinkage Behavior of Lightweight Concrete

Authors

  • Ali Ahmed Aziz Civil Engineering Department, University of Baghdad, Baghdad, Iraq
  • Ikram Faraoun Al-Mulla Civil Engineering Department, University of Baghdad. Baghdad, Iraq
Volume: 15 | Issue: 5 | Pages: 28018-28025 | October 2025 | https://doi.org/10.48084/etasr.13414

Received: 15 July 2025 | Revised: 10 August 2025 | Accepted: 22 August 2025 | Online: 6 September 2025


Corresponding author: Ali Ahmed Aziz

Abstract

This paper examines the effect of different percentages of Polypropylene Fibers (PPFs) on the restrained shrinkage behavior (Schleibinger test) of Pumice Lightweight Concrete (LWC) at 0%, 0.5%, 1%, and 1.5%. The study investigates the changes in the timing for both vertical and horizontal restrained ring shrinkage tests. As shown in the experimental results, including PPF causes significant changes in the shrinkage response, especially at higher percentages. Vertical and horizontal strains display a pattern of periodic expansion and contraction at 1.5% PPF, indicating greater resistance to crack propagation due to the bridging effect of the fibers. Compared to the reference mix, fiber reinforcement alters the strain trend from primarily compressive to a balance between the cyclic responses, suggesting a delayed and more diffuse stress build-up during drying. This observation aligns with research on the microstructural role of PPF in managing the shrinkage cracking. The results show that 1.5% PPF not only decreases the early-age dimensional reduction in LWC, but also enhances the long-term dimensional stability. This behavior is crucial in applications where premature failure due to restrained shrinkage could occur. Based on these performance trends, optimized design scenarios are proposed to balance the workability and shrinkage control, which can help determine the ideal PPF content in future applications.

Keywords:

polypropylene fibers, shrinkage strain, Schliebinger system restrained concrete, fiber-reinforced concrete, lightweight concrete, vertical strain, horizontal strain

Downloads

Download data is not yet available.

References

A. A. J. Ghanim, M. Amin, A. M. Zeyad, B. A. Tayeh, I. S. Agwa, and Y. Elsakhawy, "Effect of polypropylene and glass fiber on properties of lightweight concrete exposed to high temperature," Advances in concrete construction, vol. 15, no. 3, pp. 179–190, Jan. 2023.

M. Amin, B. A. Tayeh, and I. saad agwa, "Investigating the mechanical and microstructure properties of fibre-reinforced lightweight concrete under elevated temperatures," Case Studies in Construction Materials, vol. 13, Dec. 2020, Art. no. e00459.

R. Dollaiah, R. Venu, and P. R. Hampannaver, "Effect of Fiber on the Performance of Self-compacting Concrete with Fly Ash, GGBS, and Alccofine as Cementitious Materials – NanoWorld Journal," NanoWorld Journal, vol. 9, pp. 500–509, Mar. 2023.

J. Ahmad, F. Aslam, R. Martínez-García, J. de Prado-Gil, N. Abbas, and M. Hechmi EI Ouni, "Mechanical performance of concrete reinforced with polypropylene fibers (PPFs)," Journal of Engineered Fibers and Fabrics, vol. 16, Jan. 2021, Art. no. 15589250211060399.

P. Zhang and Q. Li, "Experimental Study on Shrinkage Properties of Cement-stabilized Macadam Reinforced with Polypropylene Fiber," Journal of Reinforced Plastics and Composites, vol. 29, no. 12, pp. 1851–1860, Jun. 2010.

Y. Ma, M. Tan, and K. Wu, "Effect of different geometric polypropylene fibers on plastic shrinkage cracking of cement mortars," Materials and Structures, vol. 35, no. 3, pp. 165–169, Apr. 2002.

S. B. Daneti, T.-H. Wee, and T. s/o Thangayah, "Effect of polypropylene fibres on the shrinkage cracking behaviour of lightweight concrete," Magazine of Concrete Research, vol. 63, no. 11, pp. 871–881, Nov. 2011.

J. R. Pereira, J. B. L. P. e Silva, L. A. Gachet, A. C. dos Santos, and R. C. C. Lintz, "Evaluation of the Addition of Polypropylene (PP) Fibers in Self-compacting Concrete (SCC) to Control Cracking and Plastic Shrinkage Between Different Methods," Materials Research, vol. 26, 2023, Art. no. e20220567.

I. F. Al-Mulla, A. S. Al-Ameeri, A. S. Al-Rihimy, and T. S. Al-Attar, "Elasticity and Load-Displacement Behavior of Engineered Cementitious Composites produced with Different Polymeric Fibers," Engineering, Technology & Applied Science Research, vol. 14, no. 1, pp. 13026–13032, Feb. 2024.

I. F. Al-Mulla, A. S. Al-Ameeri, and T. S. Al-Attar, "Long-Term Drying Shrinkage Strain of Engineered Cementitious Composite Concrete Contains Polymeric Fibers," Journal of Engineering, vol. 2024, no. 1, 2024, Art. no. 8887928.

I. F. Al-Mulla and A. S. Al-Rihimy, "The Effect of the Hydrophilic and Hydrophobic Behavior of Polymeric Fibers on Some Properties of Reactive Powder Concrete," Engineering, Technology & Applied Science Research, vol. 15, no. 2, pp. 21691–21694, Apr. 2025.

J. Abd and I. K. Ahmed, "The Effect of Low Velocity Impact Loading on Self-Compacting Concrete Reinforced with Carbon Fiber Reinforced Polymers," Engineering, Technology & Applied Science Research, vol. 11, no. 5, pp. 7689–7694, Oct. 2021.

M. Gholami, F. Moghadas Nejad, and A. M. Ramezanianpour, "Increasing the Length of Concrete Pavement Slabs Using Shrinkage Reducing Admixture and Polypropylene Fiber," International Journal of Concrete Structures and Materials, vol. 18, no. 1, Feb. 2024, Art. no. 9.

T. Aly, J. G. Sanjayan, and F. Collins, "Effect of polypropylene fibers on shrinkage and cracking of concretes," Materials and Structures, vol. 41, no. 10, pp. 1741–1753, Dec. 2008.

ACI PRC-544.1R-96: Report on Fiber Reinforced Concrete. USA: American Concrete Institute, 2023.

ASTM C1116/C1116M-23 Standard Specification for Fiber-Reinforced Concrete. USA: ASTM International, 2023.

ASTM C1581-04 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage. USA: ASTM International, 2010.

ASTM C1579-21 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert). USA: ASTM International, 2021.

ASTM C1602/C1602M-22 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete. USA: ASTM International, 2022.

ASTM C33/C33M-18 Standard Specification for Concrete Aggregates. USA: ASTM International, 2023.

Iraqi Specification IOS 45-1984. Iraq: Iraqi Standard Specification, 1984.

ASTM C150/C150M-24 Standard Specification for Portland Cement. USA: ASTM International, 2024.

Downloads

How to Cite

[1]
A. A. Aziz and I. F. Al-Mulla, “Using the Schleibinger Test System to Study the Restrained Drying Shrinkage Behavior of Lightweight Concrete”, Eng. Technol. Appl. Sci. Res., vol. 15, no. 5, pp. 28018–28025, Oct. 2025.

Metrics

Abstract Views: 23
PDF Downloads: 11

Metrics Information

License

Copyright (c) 2025 Ali Ahmed Aziz, Ikram Faraoun Al-Mulla

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.