Mechanical Performance of Sustainable Geopolymer Lightweight Concrete Exposed to Fire
Received: 2 June 2025 | Revised: 24 June 2025 | Accepted: 7 July 2025 | Online: 6 October 2025
Corresponding author: Faisal Sadeq Abdulkareem
Abstract
The need for sustainability and reduced CO2 emissions is leading to increased use of industrial waste and byproducts from the building industry. Geopolymer concrete, is an environmentally sustainable alternative to conventional Portland cement binders and preserves the natural resources. This study presents the mechanical properties of specimens subjected to fire, with the samples being exposed to fire at temperatures of 400 °C, 600 °C, and 800 °C for 1 h in a period of 56 days. The results reveal a drop in the mechanical properties as the temperature increases, with the most significant deterioration taking place at 800 °C. The greatest reduction in compressive, splitting tensile, and flexural strength was observed in the unreinforced control mix at higher temperatures, while the specimens reinforced with 1% basalt fiber showed minimal strength degradation, indicating enhanced fire resistance and structural integrity under thermal conditions.
Keywords:
geopolymer lightweight concrete, compressive strength, splitting tensile strength, flexural strength, basalt fiber, fire flameDownloads
References
C. O. Nwankwo, G. O. Bamigboye, I. E. E. Davies, and T. A. Michaels, "High volume Portland cement replacement: A review," Construction and Building Materials, vol. 260, Nov. 2020, Art. no. 120445.
A. Khaloo, E. Molaei Raisi, P. Hosseini, and H. Tahsiri, "Mechanical performance of self-compacting concrete reinforced with steel fibers," Construction and Building Materials, vol. 51, pp. 179–186, Jan. 2014.
R. Alzeebaree, A. Çevik, B. Nematollahi, J. Sanjayan, A. Mohammedameen, and M. E. Gülşan, "Mechanical properties and durability of unconfined and confined geopolymer concrete with fiber reinforced polymers exposed to sulfuric acid," Construction and Building Materials, vol. 215, pp. 1015–1032, Aug. 2019.
K.-H. Yang, J.-K. Song, and J.-S. Lee, "Properties of alkali-activated mortar and concrete using lightweight aggregates," Materials and Structures, vol. 43, no. 3, pp. 403–416, Apr. 2010.
S. H. Mohammed and N. M. Fawzi, "The Effect of the Utilization of Sustainable Materials on Some Mechanical Properties of Geopolymer Mortar," Engineering, Technology & Applied Science Research, vol. 14, no. 1, pp. 12464–12469, Feb. 2024.
Y. Mohammadi, S. P. Singh, and S. K. Kaushik, "Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state," Construction and Building Materials, vol. 22, no. 5, pp. 956–965, May 2008.
N. M. Fawzi, K. I. Aziz, and S. M. Hama, "Effect of Metakaolin on Properties of Lightweight Porcelinate Aggregate Concrete," Journal of Engineering, vol. 19, no. 04, pp. 439–452, Apr. 2013.
O. A. Abdulkareem, A. M. M. A. Bakri, H. Kamarudin, and I. K. Nizar, "A Study on the Synthesis of Fly Ash-Based Lightweight Aggregate Geopolymer Concrete," Advanced Science Letters, vol. 19, no. 1, pp. 282–285, Jan. 2013.
M. Mouli and H. Khelafi, "Performance characteristics of lightweight aggregate concrete containing natural pozzolan," Building and Environment, vol. 43, no. 1, pp. 31–36, Jan. 2008.
J. Zhao, J. Zheng, G. Peng, and P. Sun, "Spalling and cracking modelling of high-performance concrete exposed to elevated temperatures," Magazine of Concrete Research, vol. 69, no. 24, pp. 1276–1287, Dec. 2017.
A. Nazari et al., "Corrigendum to Thermal shock reactions of ordinary portland cement and geopolymer concrete: Microstructural and mechanical investigation," Construction and Building Materials, vol. 304, Oct. 2021, Art. no. 124151.
L. Vickers, W. D. A. Rickard, and A. van Riessen, "Strategies to control the high temperature shrinkage of fly ash based geopolymers," Thermochimica Acta, vol. 580, pp. 20–27, Mar. 2014.
P. K. Sarker, S. Kelly, and Z. Yao, "Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete," Materials & Design, vol. 63, pp. 584–592, Nov. 2014.
A. A. Hammadi, A. F. Izzat, and J. A. Farhan, "Effect of Fire Flame (High Temperature) on the Self Compacted Concrete (SCC) One Way Slabs," Journal of Engineering, vol. 18, no. 10, pp. 1083–1099, Oct. 2012.
R. K. Aboud, H. K. Awad, and S. D. Mohammed, "Fire flame effect on the compressive strength of reactive powder concrete using different methods of cooling," IOP Conference Series: Materials Science and Engineering, vol. 518, no. 2, Feb. 2019, Art. no. 022029.
W. Mastura Wan Ibrahim, M. Mustafa Al Bakri Abdullah, R. Ahmad, A. Naveed, C. Mohd Ruzaidi Ghazali, and M. Ibrahim, "Effects of Thermal Resistance to Fly Ash-Based Lightweight Geopolymer," IOP Conference Series: Materials Science and Engineering, vol. 551, no. 1, Dec. 2019, Art. no. 012082.
M. M. Kadhum and N. M. F. Alwaan, "Behaviour of Fire Exposed Reinforced Concrete Rigid Beams with Restrained Ends," Journal of Engineering, vol. 19, no. 03, pp. 388–402, Mar. 2013.
B. Q. Naeem and H. K. Awad, "Effect of Perlite Aggregate Replacement of Coarse Aggregate on the Behavior of SCC Exposed to Fire Flame by Using Different Cooling Methods," Journal of Engineering, vol. 31, no. 1, pp. 54–72, Jan. 2025.
C618-22 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. West Conshohocken, PA, USA: ASTM International, 2023.
C989/C989M-18a Standard Specification for Slag Cement for Use in Concrete and Mortars. West Conshohocken, PA, USA: ASTM International, 2018.
E291-18 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide). West Conshohocken, PA, USA: ASTM International, 2009.
IQS 1703 Water Used for Concrete and Mortar. Baghdad, Iraq: Central Organization for Standardization and Quality Control, 1992.
C330/C330M-14 Standard Specification for Lightweight Aggregates for Structural Concrete. West Conshohocken, PA, USA: ASTM International, 2017.
IQS 45 Aggregate from Natural Sources for Concrete and Construction. Baghdad, Iraq: Central Organization for Standardization and Quality Control, 1984.
C494/C494M-17 Standard Specification for Chemical Admixtures for Concrete. West Conshohocken, PA, USA: ASTM International, 2019.
R. Rawat and D. Pasla, "Mix design of FA-GGBS based lightweight geopolymer concrete incorporating sintered fly ash aggregate as coarse aggregate," Journal of Sustainable Cement-Based Materials, vol. 13, no. 8, pp. 1164–1179, Aug. 2024.
M. Rabie, M. R. Irshidat, and N. Al-Nuaimi, "Ambient and Heat-Cured Geopolymer Composites: Mix Design Optimization and Life Cycle Assessment," Sustainability, vol. 14, no. 9, Jan. 2022, Art. no. 4942.
E119-20 Standard Test Methods for Fire Tests of Building Construction and Materials. West Conshohocken, PA, USA: ASTM International, 2019.
EN 12390-3:2019 Testing hardened concrete - Part 3: Compressive strength of test specimens. London, UK: BSI, 2019.
C496-96 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. West Conshohocken, PA, USA: ASTM International, 2017.
C293/C293M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading). West Conshohocken, PA, USA: ASTM International, 2016.
S. S. Hussein and N. M. Fawzi, "Behavior of Geopolymer Concrete Reinforced by Sustainable Copper Fiber," IOP Conference Series: Earth and Environmental Science, vol. 856, no. 1, Jun. 2021, Art. no. 012022.
O. A. Abdulkareem, A. M. M. A. Bakri, H. Kamarudin, and I. K. Nizar, "Fire Resistance Evaluation of Lightweight Geopolymer Concrete System Exposed to Elevated Temperatures of 100-800 °C," Key Engineering Materials, vol. 594–595, pp. 427–432, 2014.
A. S. Elkhouly, A. M. Ahmed, and G. M. Ghanem, "Splitting Tensile Strength of Geopolymer Concrete Exposed to Fire," Civil Engineering Research Magazine, vol. 44, no. 2, pp. 88–99, Apr. 2022.
M. S. Amouri and N. M. Fawzi, "The Effect of Different Curing Temperatures on the Properties of Geopolymer Reinforced with Micro Steel Fibers," Engineering, Technology & Applied Science Research, vol. 12, no. 1, pp. 8029–8032, Feb. 2022.
M. Ziada, S. Erdem, Y. Tammam, S. Kara, and R. A. G. Lezcano, "The Effect of Basalt Fiber on Mechanical, Microstructural, and High-Temperature Properties of Fly Ash-Based and Basalt Powder Waste-Filled Sustainable Geopolymer Mortar," Sustainability, vol. 13, no. 22, Jan. 2021, Art. no. 12610.
Downloads
How to Cite
License
Copyright (c) 2025 Faisal Sadeq Abdulkareem, Nada Mahdi Fawzi Aljalawi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
