A Numerical Study on the Improvement of the Thermal Performance of a Solar Chimney Power Plant with Variation in the Absorber
Received: 1 June 2025 | Revised: 12 July 2025 | Accepted: 23 July 2025 | Online: 20 August 2025
Corresponding author: Bambang Arip Dwiyantoro
Abstract
Solar Chimney Power Plants (SCPPs) are a promising technology in the advancement of renewable energy systems. Among the various important design parameters, the geometry of the absorber surface plays a pivotal role in determining system performance. This study was conducted to evaluate the impact of the absorber surface geometry and height on the thermal and aerodynamic behavior of SCPPs. Five absorber configurations were investigated: standard, 3-square, 4-square, 5-square, and 6-square arrangements. Additionally, the effect of varying absorber surface heights was examined to identify optimal design parameters. The simulation results demonstrate that the 5-square configuration delivered the highest performance relative to the standard flat-absorber system, particularly at an absorber height of H₀ = 7.5 cm, where the maximum airflow velocity reached 24.45 m/s and the power output peaked at 258.38 W. The 3-square configuration also showed notable performance at H₀ = 5 cm, generating up to 156.82 W and achieving the lowest internal atmospheric pressure, indicative of improved convective flow. Overall, the findings emphasize the substantial influence of absorber surface design on SCPP efficiency, confirming that multi-square absorber configurations can significantly enhance power generation through improved thermal and fluid dynamic behavior.
Keywords:
solar chimney, modified absorber, power generation, natural convectionDownloads
References
E. Cuce, P. M. Cuce, S. Carlucci, H. Sen, K. Sudhakar, Md. Hasanuzzaman, and R. Daneshazarian, "Solar Chimney Power Plants: A Review of the Concepts, Designs and Performances," Sustainability, vol. 14, no. 3, 2022, Art. no. 1450.
M. Tawalbeh, S. Mohammed, A. Alnaqbi, S. Alshehhi, and A. Al-Othman, "Analysis for hybrid photovoltaic/solar chimney seawater desalination plant: A CFD simulation in Sharjah, United Arab Emirates," Renewable Energy, vol. 202, pp. 667-685, Jan. 2023.
S. Ali and B. Djaouida, "Investigating the feasibility of integrating vegetation into solar chimney power plants in the Tamanrasset Region," Engineering, Technology & Applied Science Research, vol. 14, no. 3, pp. 14719-14724, Jun. 2024.
W. Haaf, K. Friedrich, G. Mayr, and J. Schlaich, "Solar chimneys part I: principle and construction of the pilot plant in Manzanares," International Journal of Solar Energy, vol. 2, no. 1, pp. 3–20, 1983.
M. Ghalamchi, A. Kasaeian, M. Ghalamchi, and A. H. Mirzahosseini, "An experimental study on the thermal performance of a solar chimney with different dimensional parameters," Renewable Energy, vol. 91, pp. 477-483, Jun. 2016.
R. Mehdipour, S. Golzardi, and Z. Baniamerian, "Experimental justification of poor thermal and flow performance of solar chimney by an innovative indoor experimental setup," Renewable Energy, vol. 157, pp. 1089–1101, Sep. 2020.
B. Ghernaout, S. Bouabdallah, M. E. H. Attia, M. Arıcı, and Z. Driss, "Parametric study of the airflow structure in a solar chimney," International Journal of Heat and Technology, vol. 38, no. 2, pp. 285–292, 2020.
P. Belkhode, C. Sakhale, and A. Bejalwar, "Evaluation of the experimental data to determine the performance of a solar chimney power plant," Materials Today: Proceedings, vol. 27, no. 1, pp. 102–106, Jan. 2020.
A. Ayadi, A. Bouabidi, Z. Driss, and M. S. Abid, "Experimental and numerical analysis of the collector roof height effect on the solar chimney performance," Renewable Energy, vol. 115, pp. 649–662, Jan. 2018.
A. Lahcene, A. Y. Benazza, and M. Benguediab, "The effect of geometric parameters on the performance of solar chimney: A numerical and experimental study," Engineering, Technology & Applied Science Research, vol. 10, no. 6, pp. 6456-6461, Dec. 2020.
E. O. Yapıcı, E. Ayli, and O. Nsaif, "Numerical investigation on the performance of a small scale solar chimney power plant for different geometrical parameters," Journal of Cleaner Production, vol. 276, Dec. 2020, Art. no. 122908.
E. Cuce, H. Sena, and P. M. Cuce, "Numerical performance modeling of solar chimney power plants: Influence of chimney height for a pilot plant in Manzanares, Spain," Sustainable Energy Technologies and Assessments, vol. 39, Jun. 2020, Art. no. 100704.
A. Atia, S. Bouabdallah, B. Ghernaout, M. Teggar, and T. Benchatti, "Investigation of various absorber surface shapes for performance improvement of solar chimney power plant," Applied Thermal Engineering, vol. 235, Nov. 2023, Art. no. 121395.
D. K. Mandal, N. Biswas, A. Barman, R. Chakraborty, and N. K. Manna, "A novel design of absorber surface of solar chimney power plant (SCPP): Thermal assessment, exergy and regression analysis," Sustainable Energy Technologies and Assessments, vol. 56, Mar. 2023, Art. no. 103039.
S. Hu, D. Y. C. Leung, and J. C. Y. Chan, "Impact of the geometry of divergent chimneys on the power output of a solar chimney power plant," Energy, vol. 120, pp. 1-11, Feb. 2017, http://doi.org/10.1016/j.energy.2016.12.098.
D. K. Mandal, N. Biswas, N. K. Manna, and A. C. Benim, "Impact of chimney divergence and sloped absorber on energy efficacy of a solar chimney power plant (SCPP)," Ain Shams Engineering Journal, vol. 15, no 2, Feb. 2024, Art. no. 102390.
N. Nnabuihe et al., "Preliminary Experimental Performance Study of Hybrid Solar Thermal Collector Coated with Spectrally Selective Polyethylene Terephthalate Film," International Journal of Advanced Science and Engineering, vol. 8, no. 4, pp. 2360-2370, 2022.
B. A. Dwiyantoro and S.-W. Chau, "The Influence of Cross-Sectional Shape and Orientation of Micropillar Surface on Microdroplet Formation by a Dewetting Process," Journal of Engineering and Technological Sciences, vol. 45, no. 2, pp. 166–178, Jul. 2013.
H. Nasraoui, Z. Driss, A. Ayadi, A. Bouabidi, and H. Kchaou, "Numerical and experimental study of the impact of conical chimney angle on the thermodynamic characteristics of a solar chimney power plant," Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 233, no. 5, pp. 1185–1199, Oct. 2019.
S. Dehghani and A. H. Mohammadi, "Optimum dimension of geometric parameters of solar chimney power plants–A multi-objective optimization approach," Solar Energy, vol. 105, pp. 603–612, Jul. 2014.
N. Biswas, D. K. Mandal, N. K. Manna, and A. C. Benim, "Novel stair-shaped ground absorber for performance enhancement of solar chimney power plant," Applied Thermal Engineering, vol. 227, Jun. 2023, Art. no. 120466.
Downloads
How to Cite
License
Copyright (c) 2025 Bambang Arip Dwiyantoro, Ahmad Fakhruddin
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
