Study and Design of a WLAN WSN Wake-Up Receiver

Authors

  • Mariem Bouraoui Department of Electrical Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia | Systems Integration and Emerging Energies Laboratory, Electrical Engineering Department, National Engineers School of Sfax, University of Sfax, 3038 Sfax, Tunisia
  • Imen Barraj Department of Computer Engineering, College of Computer Engineering and Sciences, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia | Systems Integration and Emerging Energies Laboratory, Electrical Engineering Department, National Engineers School of Sfax, University of Sfax, 3038 Sfax, Tunisia
  • Mohamed Masmoudi Systems Integration and Emerging Energies Laboratory, Electrical Engineering Department, National Engineers School of Sfax, University of Sfax, 3038 Sfax, Tunisia
Volume: 15 | Issue: 4 | Pages: 25719-25726 | August 2025 | https://doi.org/10.48084/etasr.11518

Abstract

Research on wake-up receivers is gaining momentum due to the growing demand for this compact yet crucial component in advanced technological systems that rely on radio-based communication. Wake-up receivers play a key role in minimizing the activity of the main radio, thereby significantly reducing energy consumption, and extending the overall system lifetime. This paper provides an overview of the design considerations and challenges associated with wake-up receivers, along with a comparison of several existing architectures. Additionally, a Wireless Local Area Network (WLAN) wake-up receiver is validated using Advanced Design System (ADS) software. A performance comparison between Amplitude Modulation (AM) and Differential Quadrature Phase Shift Keying (DQPSK) modulation schemes is also presented.

Keywords:

WSN, WLAN, wake-up receiver, envelope detector, AM, DQPSK, modulation

Downloads

Download data is not yet available.

References

T. Kramp, R. van Kranenburg, and S. Lange, "Introduction to the Internet of Things," in Enabling Things to Talk: Designing IoT solutions with the IoT Architectural Reference Model, A. Bassi, M. Bauer, M. Fiedler, T. Kramp, R. van Kranenburg, S. Lange, and S. Meissner, Eds. Berlin, Heidelberg, Germany: Springer, 2013, pp. 1–10. DOI: https://doi.org/10.1007/978-3-642-40403-0_1

P.-H. P. Wang, C. Zhang, H. Yang, M. Dunna, D. Bharadia, and P. P. Mercier, "A Low-Power Backscatter Modulation System Communicating Across Tens of Meters With Standards-Compliant Wi-Fi Transceivers," IEEE Journal of Solid-State Circuits, vol. 55, no. 11, pp. 2959–2969, Nov. 2020. DOI: https://doi.org/10.1109/JSSC.2020.3023956

N. E. Roberts et al., "26.8 A 236nW−56.5dBm-sensitivity bluetooth low-energy wakeup receiver with energy harvesting in 65nm CMOS," in 2016 IEEE International Solid-State Circuits Conference, San Francisco, CA, USA, 2016, pp. 450–451. DOI: https://doi.org/10.1109/ISSCC.2016.7418101

P. P. Mercier et al., "Low-Power RF Wake-Up Receivers: Analysis, Tradeoffs, and Design," IEEE Open Journal of the Solid-State Circuits Society, vol. 2, pp. 144–164, 2022. DOI: https://doi.org/10.1109/OJSSCS.2022.3215099

J. Im, J. Breiholz, S. Li, B. Calhoun, and D. D. Wenzloff, "A Fully Integrated 0.2V 802.11ba Wake-Up Receiver with -91.5dBm Sensitivity," in 2020 IEEE Radio Frequency Integrated Circuits Symposium, Los Angeles, CA, USA, 2020, pp. 339–342. DOI: https://doi.org/10.1109/RFIC49505.2020.9218383

S. Bdiri, F. Derbel, and O. Kanoun, "A Tuned-RF Duty-Cycled Wake-Up Receiver with −90 dBm Sensitivity," Sensors, vol. 18, no. 1, Jan. 2018, Art. no. 86. DOI: https://doi.org/10.3390/s18010086

R. Ma, F. Protze, and F. Ellinger, "A 193-nW Wake-Up Receiver Achieving −84.5-dBm Sensitivity for Green Wireless Communications," IEEE Transactions on Green Communications and Networking, vol. 6, no. 1, pp. 512–529, Mar. 2022. DOI: https://doi.org/10.1109/TGCN.2021.3101902

H. Ren et al., "A 915MHz 19μW Blocker-Enhanced Wake-Up Receiver with Frequency-Hopping Two-Tone Modulation Achieving 53dB Tolerance to In-Band Interference," in 2022 IEEE Radio Frequency Integrated Circuits Symposium, Denver, CO, USA, 2022, pp. 299–302. DOI: https://doi.org/10.1109/RFIC54546.2022.9863142

S. Talari and P. C. Sekhar, "A High Gain Dual Band Hexagonal Metamaterial Inspired Antenna for 5G Applications," Engineering, Technology & Applied Science Research, vol. 14, no. 6, pp. 18029–18035, Dec. 2024. DOI: https://doi.org/10.48084/etasr.8575

L.-T. Wang, Y. Xiong, and M. He, "Review on UWB Bandpass Filters," in UWB Technology - Circuits and Systems, M. Kheir, Ed. London, United Kingdom: IntechOpen, 2019. DOI: https://doi.org/10.5772/intechopen.87204

M. Bouraoui, A. Neifar, I. Barraj, and M. Masmoudi, "Low-Power Envelope Detector for WSN Wake-up Receiver Applications," in 2023 IEEE International Conference on Design, Test and Technology of Integrated Systems, Gammarth, Tunisia, 2023, pp. 1–5. DOI: https://doi.org/10.1109/DTTIS59576.2023.10348315

W. Samakkhee, K. Phaebua, and T. Lertwiriyaprapa, "5.8 GHz rectifier circuit for electromagnetic energy harvesting system," in 2017 International Symposium on Antennas and Propagation (ISAP), Phuket, Thailand, 2017, pp. 1–2. DOI: https://doi.org/10.1109/ISANP.2017.8229029

E. Mousa Ali, N. Z. Yahaya, P. Nallagownden, and M. A. Zakariya, "A novel rectifying circuit for microwave power harvesting system," International Journal of RF and Microwave Computer-Aided Engineering, vol. 27, no. 4, Apr. 2017, Art. no. e21083. DOI: https://doi.org/10.1002/mmce.21083

Downloads

How to Cite

[1]
M. Bouraoui, I. Barraj, and M. Masmoudi, “Study and Design of a WLAN WSN Wake-Up Receiver”, Eng. Technol. Appl. Sci. Res., vol. 15, no. 4, pp. 25719–25726, Aug. 2025.

Metrics

Abstract Views: 128
PDF Downloads: 213

Metrics Information