A Simplified Energy Model Approach for the Determination of Long-Term Crack Width in Reinforced Concrete Elements
Received: 15 March 2023 | Revised: 30 March 2023 | Accepted: 4 April 2023 | Online: 19 April 2023
Corresponding author: Hamdy A. El-Gohary
Abstract
The deformation of reinforced concrete elements is a main consideration during the design process due to its importance for the service life of structures. Deformation (deflections and cracking) control has an effect at both the design and construction stages. The determination of crack width based on simple code provisions, leads to conservative results, due to many affecting parameters being unknown. The exact determination of the crack width is a very complicated process with significant computational load. In the current paper, a simplified procedure is proposed for the prediction of crack width at different loading stages. The procedure is based on a previously published energy model that uses the integration of the moment-curvature relationship to take into consideration the load stage and most affecting design variables. The obtained results using the simplified model are then tested against previously published experimental data and a good agreement is shown.
Keywords:
energy model, reinforced concrete elements, deformation, state diagrams, general and residual resourcesDownloads
References
M. Oad, A. H. Buller, B. A. Memon, and N. A. Memon, "Impact of Long-Term Loading on Reinforced Concrete Beams Made with Partial Replacement of Coarse Aggregates with Recycled Aggregates from Old Concrete," Engineering, Technology & Applied Science Research, vol. 9, no. 1, pp. 3818–3821, Feb. 2019. DOI: https://doi.org/10.48084/etasr.2498
M. A. J. Hassan and A. F. Izzet, "Serviceability of Reinforced Concrete Gable Roof Beams with Openings under Static Loads," Engineering, Technology & Applied Science Research, vol. 9, no. 5, pp. 4813–4817, Oct. 2019. DOI: https://doi.org/10.48084/etasr.3110
M. Oad, A. H. Buller, B. A. Memon, N. A. Memon, and S. Sohu, "Long Term Impact in Reinforced Recycled Concrete Beams Under 9-Month Loading," Engineering, Technology & Applied Science Research, vol. 9, no. 3, pp. 4140–4143, Jun. 2019. DOI: https://doi.org/10.48084/etasr.2697
H. A. E. & M. M. Assas, "New design approach for crack width calculation in reinforced concrete structures," in Research and Applications in Structural Engineering, Mechanics and Computation, Boca Raton, FL, USA: CRC Press, 2013.
N. I. Karpenko, T. A. Mukhamediev, and M. A. Sapozhnikov, "On the Construction of a Method for Calculating Rod Elements Based on Material Deformation Diagrams. Improvement of Methods for Calculating Statically Indeterminate Reinforced Concrete Structures," in Improvement of Methods for Calculating Statically Indeterminate Reinforced Concrete Structures, 1987, pp. 4–24.
M. M. Attard and S. Setunge, "Stress-Strain Relationship of Confined and Unconfined Concrete," Materials Journal, vol. 93, no. 5, pp. 432–442, Sep. 1996. DOI: https://doi.org/10.14359/9847
Eurocode 2: Design of concrete structures - Part 1-1 : General rules and rules for buildings. Brussels, Belgium: CEN, 2004.
V. S. Dorofeev, V. Yu, and Bardanov, Calculation of bent elements taking into account the complete diagram of concrete deformation. Odessa, Ukraine: OGASA, 2003.
V. M. Romashko, The deformation and power model of concrete and reinforced concrete resistance. Rivne, Ukraine: O. Zen, 2016.
O. V. Romashko-Maistruk, "Basics of energy resource modeling of reinforced concrete elements," Collected scientific works of Ukrainian State University of Railway Transport, no. 191, pp. 49-56, Nov. 2020. DOI: https://doi.org/10.18664/1994-7852.191.2020.217292
V. Romashko and O. Romashko, "The construction features of the deformation and force model of concrete and reinforced concrete resistance," MATEC Web of Conferences, vol. 116, 2017, Art. no. 02028. DOI: https://doi.org/10.1051/matecconf/201711602028
V. M. Romashko, "Деякі особливості діаграми деформування бетону. Ресурсоекономні матеріали, конструкції, будівлі та споруди," Збірник наукових праць, no. 14, pp. 294–301, 2006.
V. M. Romashko, "Щодо визначення модуля деформацій бетону," Вісник НУВГП, vol. 2, no. 4, pp. 292–297, 2007.
V. M. Romashko and O. V. Romashko, "Energy resource of reinforced concrete elements and structures for the deformation-force model of their deformation," IOP Conference Series: Materials Science and Engineering, vol. 708, no. 1, Sep. 2019, Art. no. 012068. DOI: https://doi.org/10.1088/1757-899X/708/1/012068
V. Romashko and O. Romashko, "Calculation of the crack resistance of reinforced concrete elements with allowance for the levels of normal crack formation," MATEC Web of Conferences, vol. 230, 2018, Art. no. 02028. DOI: https://doi.org/10.1051/matecconf/201823002028
R. I. Gilbert and S. Nejadi, An Experimental Study of Flexural Cracking in Reinforced Concrete Members Under Sustained Loads. Sydney, NSW, Australia: University of New South Wales, School of Civil and Environmental Engineering, 2004.
Downloads
How to Cite
License
Copyright (c) 2023 Hamdy A. El-Gohary

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.