Modeling and Optimization of Piston Pumps for Drilling

Authors

  • Marius Stan Mechanical Engineering Department, Petroleum-Gas University of Ploiesti, Romania
  • Dragos Gabriel Zisopol Mechanical Engineering Department, Petroleum-Gas University of Ploiesti, Romania
Volume: 13 | Issue: 2 | Pages: 10505-10510 | April 2023 | https://doi.org/10.48084/etasr.5714

Abstract

This study highlights the operational and practical advantages of using triplex mud pump systems in favor of duplex systems to optimize drilling capabilities under specific operational conditions. Additionally, the material selection of the piston subassembly was analyzed and simulated under operational parameters in SolidWorks to determine the advantages of using HNBR over NBR elastomer materials.

Keywords:

pumps, piston, elastomer, finite element mehod, analysis

Downloads

Download data is not yet available.

References

M. Stan, Metode avansate de proiectare a utilajului petrolier. Ploiesti, Romania: Editura Universităţii Petrol-Gaze din Ploiesti, 2010.

D. G. Zisopol, M. Minescu, M. Badicioiu, and M. M. Caltaru, "Theoretical and Experimental Investigations on 20 Inches Threaded Casing Connections Failure under Field Conditions," Engineering, Technology & Applied Science Research, vol. 11, no. 4, pp. 7464–7468, Aug. 2021. DOI: https://doi.org/10.48084/etasr.4318

M. Elashmawy, "3D-CFD Simulation of Confined Cross-Flow Injection Process Using Single Piston Pump," Engineering, Technology & Applied Science Research, vol. 7, no. 6, pp. 2308–2312, Dec. 2017. DOI: https://doi.org/10.48084/etasr.1561

D. G. Zisopol, "Experimental research concerning drill pipe geometry optimization," Lucrarile Sesiunii de Comunicari Stiintifice, vol. 4, pp. 169–178, Jan. 1997.

D. G. Zisopol, "Experimental research related to the behaviour of the materials afferent to the liners and the pistons for production pumps under wear conditions," 2004, [Online]. Available: https://essuir.sumdu.edu.ua/handle/123456789/10739.

M. M. Caltaru, R. G. Ripeanu, M. Badicioiu, and D. G. Zisopol, "Experimental Researches to Establish the Optimum Hardbanding Technology and Materials of the Heavy Weight Drill Pipe," MATEC Web of Conferences, vol. 318, 2020, Art. No. 01017. DOI: https://doi.org/10.1051/matecconf/202031801017

D. G. Zisopol and A. Dumitrescu, Ecotehnologie. Studii de caz. Ploiesti, Romania: Editura Universității Petrol-Gaze din Ploiesti, 2020.

D. G. Zisopol and A. Dumitrescu, Materiale si Tehnologii Primare. Aplicații practice și studii de caz. Ploiesti, Romania: Editura Universitatii din Ploiesti, 2005.

M. Minescu and D. Zisopol, Sudarea țevilor şi fitingurilor din polietilenă de înaltă densitate. Ploiesti, Romania: Editura Universității Petrol-Gaze din Ploiesti, 2021.

D. G. Zisopol, M. Minescu, and D. V. Iacob, "A Theoretical-Experimental Study on the Influence of FDM Parameters on the Dimensions of Cylindrical Spur Gears Made of PLA," Engineering, Technology & Applied Science Research, vol. 13, no. 2, pp. 10471–10477, Apr. 2023.

"Solidworks 3D CAD Design Software." Dassault Systemes, [Online]. Available: https://www.solidworks.com/.

M. M. Caltaru, M. Badicioiu, A. Dinita, D. G. Zisopol, R. G. Ripeanu, and M. Minescu, "Influence of Chemical Corrosive Environment with H2S on Drill Strings, Experimental Researches," Revista de Chimie, vol. 71, no. 4, pp. 29–37, May 2020. DOI: https://doi.org/10.37358/RC.20.4.8040

I. Lambrescu and D. G. Zisopol, "Complex analysis of collapse strength for tubulars used in the oil and gas industry," Geoenergy Science and Engineering, vol. 221, Feb. 2023, Art. no. 111275. DOI: https://doi.org/10.1016/j.petrol.2022.111275

D. G. Zisopol, D. V. Iacob, and A. I. Portoaca, "A Theoretical-Experimental Study of the Influence of FDM Parameters on PLA Spur Gear Stiffness," Engineering, Technology & Applied Science Research, vol. 12, no. 5, pp. 9329–9335, Oct. 2022. DOI: https://doi.org/10.48084/etasr.5183

Downloads

How to Cite

[1]
M. Stan and D. G. Zisopol, “Modeling and Optimization of Piston Pumps for Drilling”, Eng. Technol. Appl. Sci. Res., vol. 13, no. 2, pp. 10505–10510, Apr. 2023.

Metrics

Abstract Views: 708
PDF Downloads: 393

Metrics Information

Most read articles by the same author(s)