Improving Performance of the Braking Process, and Analysis Torque-Speed Characteristics of the Induction Motor

Authors

  • O. M. Al-Barbarawi Electric Power Engineering Department, Al-Balqa’ Applied University, Jordan
Volume: 8 | Issue: 6 | Pages: 3585-3591 | December 2018 | https://doi.org/10.48084/etasr.2325

Abstract

This study aims to investigate, analyze, discuss and illustrate an effective and reliable fast braking system used in a three-phase induction motor by combining two or more different conventional braking methods such as dynamic-plugging and electromagnetic-plugging. The plugging process is implemented by disconnecting one of the stator phases and connecting it with an electromagnetic brake while interchanging the other two phases. The dynamic process is executed by inserting high resistance in the rotor circuit of the motor. The performance of the torque-speed characteristics of the induction motor will be studied and analyzed through the dynamic process. Mathematical models have been developed and simulated. Results show that the braking process time is greatly reduced.

Keywords:

electromagnetic brake, plugging-dynamic brake, starting, torque-speed characteristics

Downloads

Download data is not yet available.

References

M. S. Alshamasin, “Control of Zero Sequence Braking for a Three-phase Induction Motor Operating from Single-phase Supply with a Controlled Capacitor”, Journal of Applied Sciences, Vol. 12, No. 24, pp. 2616-2620, 2012 DOI: https://doi.org/10.3923/jas.2012.2616.2620

O. M. Al-Barbarawi, “Enhancing the Braking Process, Starting and Electromagnetic Torques of the Induction Motor”, International Journal on Engineering Applications, Vol. 5,No. 4, pp. 108-114, 2017

O. M. Al-Barbarawi, “Analysis of the Rotating Magnetic Field of an AC Machines in the Transient Cases”, MAGNT Research, Vol. 4, No. 2, pp. 91-98, 2017

S. J. Chapman Electric Machinery Fundamentals, McGraw-Hill Inc, Avenue of the Americas, New York, 2005

J. Hindmarsh, A. Renfrew, Electrical Machines and Drive Systems, Alasdair Renfrew, 1997 DOI: https://doi.org/10.1016/B978-075062724-5/50006-1

P. L. Rongmei, S. L. Shimi, S. Chatterji, V. K. Sharma, “A Novel Fast Braking System for Induction Motor”, International Journal of Engineering and Innovative Technology, Vol. 1, No. 6, pp. 65-69, 2012

D. Sarkar, P. K. Mukherjee, S. K. Sen, “Temperature rise of an induction motor during plugging”, IEEE Transactions on Energy Conversion, Vol. 7, No. 1, pp. 116-124, 1992 DOI: https://doi.org/10.1109/60.124550

Y. Yasa, E. Sincar, B. T. Ertugrul, E. Mese, “Design Considerations of Electromagnetic Brakes for Servo Applications”, 2014 IEEE 23rd International Symposium on Industrial Electronics, Istanbul, Turkey June 1-4, 2014 DOI: https://doi.org/10.1109/ISIE.2014.6864709

C. B. Rajanathan, Z. W. Shi, D. S. Thompson, “Electromechanical Transients in a Three-phase Induction Motor during Phase Failure and Plugging”, IEEE Transactions on Magnets, Vol. 33, No. 2, pp. 1219-1222, 1997 DOI: https://doi.org/10.1109/20.582473

H. A. Hairik, R. H. Thejel, W. A. Kadhem, “Proposed Scheme for Plugging Three-Phase Induction Motor”, 15th IEEE Mediterranean Electrotechnical Conference, Valletta, Malta, April 26-28, 2010 DOI: https://doi.org/10.1109/MELCON.2010.5476349

M. Covino, M. L. Grassi, E. Pagano, “Analysis of braking Operations in Present-Day Electric Drives with Asynchronous Motors”, IEEE International Electric Machines and Drives Conference Record, Milwaukee, USA, May 18-21, 1997

R. Singh, S. Umashankar, D. Vijaykumar, D. P. Kothari, “Dynamic braking of induction motor - Analysis of conventional methods and an efficient multistage braking model”, 2013 International Conference on Energy Efficient Technologies for Sustainability, Nagercoil, India, April 10-12, 2013 DOI: https://doi.org/10.1109/ICEETS.2013.6533382

T. Sukmadi, S. C. Buana, T. Andromeda, M. Facta, “A prototype of multistage dynamic braking of three phase squirrel cage induction motor”, 2016 3rd International Conference on Information Technology Computer and Electrical Engineering, Semarang, Indonesia, October 19-20, 2016 DOI: https://doi.org/10.1109/ICITACEE.2016.7892441

Downloads

How to Cite

[1]
O. M. Al-Barbarawi, “Improving Performance of the Braking Process, and Analysis Torque-Speed Characteristics of the Induction Motor”, Eng. Technol. Appl. Sci. Res., vol. 8, no. 6, pp. 3585–3591, Dec. 2018.

Metrics

Abstract Views: 429
PDF Downloads: 226

Metrics Information
Bookmark and Share