Evaluating the Compressive Strength of Sulfur Mortar in Comparison with Conventional Cement Mortar
Received: 20 March 2025 | Revised: 6 April 2025 and 16 April 2025 | Accepted: 19 April 2025 | Online: 2 August 2025
Corresponding author: Rawa Shakir Muwashee
Abstract
The quantity of sulfur produced as a byproduct of the industrial refining process is large because of the fast-growing usage of fossil fuels. The future sulfur levels are predicted to rise steadily, therefore without a counterplan, the high expense of waste management will be necessary. Therefore, in this study, sulfur was utilized as a building ingredient for concrete and asphalt. The purpose of the current work was to evaluate the compressive strength of unmodified sulfur mortar (made with unmodified sulfur binder instead of Portland cement) and compare it to the strength of the cement mortar. Specimens of cement mortar and sulfur mortar with three different percentages of sulfur (30, 35, and 40%) were tested and the results showed that the mortar with 40% of sulfur presented the optimum strength. These four types of mortar were further tested to inspect their properties in severe environments, namely their chemical resistance. In the resistance test, in 30% HCl solution, the cement mortar case demonstrated the most significant mass reduction (19.4%) and compressive strength reduction (83%), whereas the 40% of the sulfur mortar case exhibited the lowest reduction percentages for both the mass (3.3%) and compressive strength (36%). These findings demonstrate that the unmodified sulfur mortar, when optimally proportioned, offers superior performance in aggressive environments, a rapid strength gain, and a viable use for excess industrial sulfur. The study contributes to the sustainable construction material research by providing a low-cost, high-durability alternative to cement mortar, with particular applicability in infrastructure exposed to acids, such as sewage systems, industrial floors, and chemical containment structures.
Keywords:
cement mortar, compressive strength, HCl acid, sulfur mortarDownloads
References
B. A. Salman and M. Z. Al-Mulali, "Production of Sustainable Foam Concrete using Foam Concrete Block Waste as Partial Cement Replacement," Engineering, Technology & Applied Science Research, vol. 15, no. 1, pp. 20162–20166, Feb. 2025. DOI: https://doi.org/10.48084/etasr.9655
K. M. Osman, M. A. Elyamany, M. E. Elfakharany, and S. S. Mostafa, "Effect of Powdered Nano-Local Banded Iron Formation (BIF) Rock on Some Mechanical Properties of Cementitious Concrete," Engineering, Technology & Applied Science Research, vol. 15, no. 1, pp. 19528–19537, Feb. 2025. DOI: https://doi.org/10.48084/etasr.9428
J.-G. Wagenfeld, K. Al-Ali, S. Almheiri, A. F. Slavens, and N. Calvet, "Sustainable applications utilizing sulfur, a by-product from oil and gas industry: A state-of-the-art review," Waste Management (New York, N.Y.), vol. 95, pp. 78–89, Jul. 2019. DOI: https://doi.org/10.1016/j.wasman.2019.06.002
J.-H. Park, J.-W. Ahn, K.-H. Kim, and Y.-S. Son, "Historic and futuristic review of electron beam technology for the treatment of SO2 and NOx in flue gas," Chemical Engineering Journal, vol. 355, pp. 351–366, Jan. 2019. DOI: https://doi.org/10.1016/j.cej.2018.08.103
K. Kyuhun, "Mechanical Properties of Sulfur Concrete," M.S. thesis, Urban Infrastructure Engineering Program, Graduate School of UNIST, Ulsan, South Korea, 2013.
K. R. Farhat and M. Jamali, "Effect of Admixture on Properties of Concrete," International Research Journal of Engineering and Technology (IRJET), vol. 09, no. 10, pp. 934–945, Oct. 2022.
E. S. Romadhon and A. Hanif, "Analysis of Compressive Strength of Sulfur Concrete," Journal of Mechanical, Civil and Industrial Engineering, vol. 3, no. 2, pp. 07–16, May 2022. DOI: https://doi.org/10.32996/jmcie.2022.3.2.2
Guide for Mixing and Placing Sulfur Concrete in Construction ACI 548.2R-93, American Concrete Institute, 1998
H. Zhong, D. Liu, X. Yuan, X. Xiong, and K. Han, "Advanced Micro/Nanostructure Silicon-Based Anode Materials for High-Energy Lithium-Ion Batteries: From Liquid- to Solid-State Batteries," Energy & Fuels, vol. 38, no. 9, pp. 7693–7732, May 2024. DOI: https://doi.org/10.1021/acs.energyfuels.4c00633
N. Amanova et al., "Sulfur-based concrete: Modifications, advancements, and future prospects," Construction and Building Materials, vol. 435, Jul. 2024, Art. no. 136765. DOI: https://doi.org/10.1016/j.conbuildmat.2024.136765
S. Gwon, S.-Y. Oh, and M. Shin, "Strength and Microstructural Characteristics of Sulfur Polymer Composites Containing Binary Cement and Waste Rubber," Construction and Building Materials, vol. 181, pp. 276–286, Aug. 2018. DOI: https://doi.org/10.1016/j.conbuildmat.2018.06.043
J. M. Kioko, "Utilization of Concrete Waste in the Manufacture of Portland Pozzolana Cement," M.S. thesis, Department of Chemistry, University of Nairobi, Kenya, 2023.
R. Fediuk et al., "A Critical Review on the Properties and Applications of Sulfur-Based Concrete," Materials, vol. 13, no. 21, p. 4712, Jan. 2020. DOI: https://doi.org/10.3390/ma13214712
Z. Li, X. Zhou, H. Ma, and D. Hou, Advanced Concrete Technology. John Wiley & Sons, 2022. DOI: https://doi.org/10.1002/9781119806219
V. Gracia and I. Casanova, "Sulfur Concrete: A Viable Alternative for Lunar Construction," Space 98, pp. 585–591, Apr. 2012. DOI: https://doi.org/10.1061/40339(206)67
M. A. Meyers, A. Mishra, and D. J. Benson, "Mechanical properties of nanocrystalline materials," Progress in Materials Science, vol. 51, no. 4, pp. 427–556, May 2006. DOI: https://doi.org/10.1016/j.pmatsci.2005.08.003
W. L. Sheppard, "Sulphur Mortarts: A Historical Survey," Sulphur Institute Journal, vol. 11, no. 3/4, pp. 15–17, 1975.
Aggregate from Natural Sources for Concrete and Construction, Iraqi Specification No.5, Central Organization for Standardization and Quality Control, Baghdad, 1984.
Specification for Standard Sand, ASTM C778-21, ASTM International, 2021
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, ASTM C109/C109M-20, ASTM International, 2020.
H. F. W. Taylor, Cement Chemistry. Thomas Telford, 1997. DOI: https://doi.org/10.1680/cc.25929
F. M. Lea, Lea’s Chemistry of Cement and Concrete, Fourth Edition, 4th edition. London: Butterworth-Heinemann, 1998.
A. M. Neville, Properties of Concrete, 5th ed. Prentice Hall, 2012.
J. M. Dale and A. C. Ludwig, "Advanced Studies of Sulphur-Aggregate Mixtures as Structural Materials.," Southwest Research Institute, San Antonio, Oct. 1968.
M. Alexander, A. Bentur, and S. Mindess, Durability of Concrete: Design and Construction. Boca Raton: CRC Press, 2017. DOI: https://doi.org/10.1201/9781315118413
Downloads
How to Cite
License
Copyright (c) 2025 Rawa Shakir Muwashee
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
