Assessment of Shear Strength Models of Reinforced Concrete Columns


  • T. A. Nguyen Department of Civil Engineering, Vinh University, Vietnam
  • N. M. Pham Department of Civil Engineering, Vinh University, Vietnam
  • T. C. Vo Department of Civil Engineering, Vinh University, Vietnam
  • D. D. Nguyen Department of Civil Engineering, Vinh University, Vietnam
Volume: 12 | Issue: 6 | Pages: 9440-9444 | December 2022 |


Shear strength is a crucial parameter in designing Reinforced Concrete (RC) columns considering the effects of lateral loads such as wind or earthquakes. Numerous design codes and published studies have proposed equations for calculating the shear strength of RC columns. However, a discrepancy exists between the calculated models and the experimental results. The aim of this study is to evaluate the calculated models for the shear strength of rectangular RC columns based on 735 data sets, obtained from the literature. Six code-based and empirical models are investigated in this paper. The four code-based models include ACI 318 (2014), CSA (2014), Eurocode 8 (2005), and FEMA 273 (1997), and the two empirical models are proposed by Ascheim & Moehle (1992) [8] and Sezen & Moehle (2004) [9]. The shear strengths of RC columns are calculated for the six models using inputs from the experimental database. Finally, the results are evaluated using statistical indicators, including coefficient of determination and root-mean-squared error. The results reveal that Eurocode 8 (2005) is the best model, followed by Sezen & Moehle (2004) and Canada CSA (2014) since the results of those models are close to the experimental ones and shown to be more conservative than the others.


rectangular RC column, shear strength, design code, empirical formula, experimental data


Download data is not yet available.


L. Hamzaoui and T. Bouzid, "The Proposition of an EI Equation of Square and L–Shaped Slender Reinforced Concrete Columns under Combined Loading," Engineering, Technology & Applied Science Research, vol. 11, no. 3, pp. 7100–7106, Jun. 2021. DOI:

H. Ullah, M. Rizwan, M. Fahad, and S. a. A. Shah, "Seismic Evaluation of the RC Moment Frame Structure using the Shake Table," Engineering, Technology & Applied Science Research, vol. 11, no. 1, pp. 6674–6679, Feb. 2021. DOI:

A. R. Khoso, J. S. Khan, R. U. Faiz, M. A. Akhund, A. Ahmed, and F. Memon, "Identification of Building Failure Indicators," Engineering, Technology & Applied Science Research, vol. 9, no. 5, pp. 4591–4595, Oct. 2019. DOI:

ACI318-(2008), Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary. Farmington Hills, MI, USA: American Concrete Institute, 2008.

CSA-(2014), Design of concrete structures (CSA A23. 3-14). Toronto, ON, Canada: Canadian Standards Association, 2014.

SS-EN 1998-1(2004), Eurocode 8: Design Of Structures For Earthquake Resistance - Part 1: General Rules, Seismic Actions And Rules For Buildings. London, UK: British Standards Institution, 2004.

FEMA 273, NEHRP Guidelines For The Seismic Rehabilitation Of Buildings. Washington, DC, USA: Building Seismic Safety Council for the Federal Emergency Management Agency, 1997.

M. Ascheim and J. P. Moehle, "Shear Strength and Deformability of RC Bridge Columns Subjected to Inelastic Cyclic Displacements," University of California, Berkeley, CA, USA, UCB/EERC-92/04, Mar. 1992.

H. Sezen and J. P. Moehle, "Shear Strength Model for Lightly Reinforced Concrete Columns," Journal of Structural Engineering, vol. 130, no. 11, pp. 1692–1703, Nov. 2004. DOI:

ASCE/SEI 41-06(2007), Seismic Rehabilitation of Existing Buildings. Reston, VA, USA: American Society of Civil Engineers, 2007.

W. Ghannoum et al., "NEES: ACI 369 Rectangular Column Database," DEEDS, 2015.

M. A. Belkacem, H. Bechtoula, N. Bourahla, and A. A. Belkacem, "Effect of axial load and transverse reinforcements on the seismic performance of reinforced concrete columns," Frontiers of Structural and Civil Engineering, vol. 13, no. 4, pp. 831–851, Aug. 2019. DOI:

D. Wang, H.-N. Li, and G. Li, "Experimental study on dynamic mechanical properties of reinforced concrete column," Journal of Reinforced Plastics and Composites, vol. 32, no. 23, pp. 1793–1806, Dec. 2013. DOI:

J. Xiao and Ch. Zhang, "Seismic behavior of RC columns with circular, square and diamond sections," Construction and Building Materials, vol. 22, no. 5, pp. 801–810, May 2008. DOI:

H. Rodrigues, A. Furtado, and A. Arede, "Behavior of Rectangular Reinforced-Concrete Columns under Biaxial Cyclic Loading and Variable Axial Loads," Journal of Structural Engineering, vol. 142, no. 1, Jan. 2016, Art. no. 04015085. DOI:

J. Melo, H. Varum, and T. Rossetto, "Experimental cyclic behaviour of RC columns with plain bars and proposal for Eurocode 8 formula improvement," Engineering Structures, vol. 88, pp. 22–36, Apr. 2015. DOI:

J. C. M. Ho, "Experimental Tests on High-Strength Concrete Columns Subjected to Combined Medium Axial Load and Flexure," Advances in Structural Engineering, vol. 15, no. 8, pp. 1359–1374, Aug. 2012. DOI:

D. Wu, Y. Ding, J. Su, Z.-X. Li, L. Zong, and K. Feng, "Effects of tie detailing configurations on reinforcement buckling and seismic performance of high-strength RC columns," Soil Dynamics and Earthquake Engineering, vol. 147, Aug. 2021, Art. no. 106791. DOI:

C. T. N. Tran, "Experimental and analytical studies on the seismic behavior of reinforced concrete columns with light transverse reinforcement," Ph.D. dissertation, Nanyang Technological University, Singapore, 2010.

Y. C. Ou, D. P. Kurniawan, and N. Handika, "Shear behavior of reinforced concrete columns with high-strength steel and concrete under low axial load," in Reinforced Concrete Columns with High Strength Concrete and Steel Reinforcement, Toronto, ON, Canada, Oct. 2012, vol. 293, pp. 145–160.

Y.-A. Li, Y.-T. Huang, and S.-J. Hwang, "Seismic Response of Reinforced Concrete Short Columns Failed in Shear," Structural Journal, vol. 111, no. 4, pp. 945–954, Jul. 2014. DOI:

V. Popa, D. Cotofana, and R. Vacareanu, "Effective stiffness and displacement capacity of short reinforced concrete columns with low concrete quality," Bulletin of Earthquake Engineering, vol. 12, no. 6, pp. 2705–2721, Dec. 2014. DOI:

C. Jin, Z. Pan, S. Meng, and Z. Qiao, "Seismic Behavior of Shear-Critical Reinforced High-Strength Concrete Columns," Journal of Structural Engineering, vol. 141, no. 8, Aug. 2015, Art. no. 04014198. DOI:

M. M. EL-Attar, H. Z. El-Karmoty, and A. A. EL-Moneim, "The behavior of ultra-high-strength reinforced concrete columns under axial and cyclic lateral loads," HBRC Journal, vol. 12, no. 3, pp. 284–295, Dec. 2016. DOI:

T.-S. Eom, S.-M. Kang, H.-G. Park, T.-W. Choi, and J.-M. Jin, "Cyclic loading test for reinforced concrete columns with continuous rectangular and polygonal hoops," Engineering Structures, vol. 67, pp. 39–49, May 2014. DOI:

E. A. Opabola, K. J. Elwood, and S. Oliver, "Deformation capacity of reinforced concrete columns with smooth reinforcement," Bulletin of Earthquake Engineering, vol. 17, no. 5, pp. 2509–2532, May 2019. DOI:

C. Goksu, H. Yilmaz, S. R. Chowdhury, K. Orakcal, and A. Ilki, "The Effect of Lap Splice Length on the Cyclic Lateral Load Behavior of RC Members with Low-Strength Concrete and Plain Bars," Advances in Structural Engineering, vol. 17, no. 5, pp. 639–658, May 2014. DOI:

Y. Zhang, S. Zheng, X. Rong, L. Dong, and H. Zheng, "Seismic Performance of Reinforced Concrete Short Columns Subjected to Freeze–Thaw Cycles," Applied Sciences, vol. 9, no. 13, Jan. 2019, Art. no. 2708. DOI:

S. Bousias, A.-L. Spathis, and M. N. Fardis, "Seismic Retrofitting of Columns with Lap Spliced Smooth Bars Through FRP or Concrete Jackets," Journal of Earthquake Engineering, vol. 11, no. 5, pp. 653–674, Oct. 2007. DOI:

K. K. Arani, M. D. Ludovico, M. S. Marefat, A. Prota, and G. Manfredi, "Lateral Response Evaluation of Old Type Reinforced Concrete Columns with Smooth Bars," Structural Journal, vol. 111, no. 4, pp. 827–838, Jul. 2014. DOI:

T. P. Pham and B. Li, "Seismic Performance of Reinforced Concrete Columns with Plain Longitudinal Reinforcing Bars (with Appendix)," Structural Journal, vol. 111, no. 3, pp. 561–572, May 2014. DOI:

J. Zhang, R. Cai, C. Li, and X. Liu, "Seismic behavior of high-strength concrete columns reinforced with high-strength steel bars," Engineering Structures, vol. 218, Sep. 2020, Art. no. 110861. DOI:

N. H. Dinh, S. Park, and K.-K. Choi, "Seismic performance of reinforced concrete columns retrofitted by textile-reinforced mortar jackets," Structure and Infrastructure Engineering, vol. 16, no. 10, pp. 1364–1381, Oct. 2020. DOI:

C.-G. Kim, H.-G. Park, and T.-S. Eom, "Effects of Type of Bar Lap Splice on Reinforced Concrete Columns Subjected to Cyclic Loading," Structural Journal, vol. 116, no. 2, pp. 183–194, Mar. 2019. DOI:

H.-J. Hwang, J.-O. Noh, and H.-G. Park, "Structural capacity of reinforced concrete columns with U-shaped transverse bars," Engineering Structures, vol. 216, Aug. 2020, Art. no. 110686. DOI:

K.-K. Choi, G. T. Truong, and J.-C. Kim, "Seismic performance of lightly shear reinforced RC columns," Engineering Structures, vol. 126, pp. 490–504, Nov. 2016. DOI:


How to Cite

T. A. Nguyen, N. M. Pham, T. C. Vo, and D. D. Nguyen, “Assessment of Shear Strength Models of Reinforced Concrete Columns”, Eng. Technol. Appl. Sci. Res., vol. 12, no. 6, pp. 9440–9444, Dec. 2022.


Abstract Views: 756
PDF Downloads: 586

Metrics Information

Most read articles by the same author(s)

<< < 1 2