Quality of Recycled Aggregates and Compressive Strength of No-Fines Recycled-Aggregate Concrete
Received: 21 July 2021 | Revised: 20 August 2021 | Accepted: 28 August 2021 | Online: 12 October 2021
This research paper presents the laboratory investigations of the compressive strength of no-fines concrete made with demolished waste as coarse aggregates used in percentages from 20% to 100%. The basic properties of aggregates were determined. Sieve analysis of both conventional and recycled aggregates was conducted to ensure the existence of well-graded aggregates in concrete. Nine concrete mixes were designed with an aggregate-cement ratio of 4. Additionally, three batches were prepared (conventional, recycled, conventional no-fines concrete) and the results were compared. For all mixes, the water-cement ratio was equal to 0.5. In each batch, 5 cylinders of standard size (total 60 samples) were prepared and cured for 28 days. The weight of the specimens was determined and compressive strength was checked in a Universal Testing Machine under gradually increasing load. A decrease in weight and compressive strength was recorded for the batches of the proposed concrete. Results show that at 40% replacement level the loss of compressive strength is 19% and the weight reduction of the samples was equal to 9%.
Keywords:recycled aggregate concrete, no-fines concrete, compressive strength, demolishing waste, recycled coarse aggregates
S. E. Shaji and J. S. Jithin, "Mechanical Properties of Concrete with Admixed Recycled Aggregate," International Journal of Engineering Research & Technology, vol. 6, no. 6, pp. 1-6, Apr. 2018.
M. Oad, A. H. Buller, B. A. Memon, N. A. Memon, Z. A. Tunio, and M. A. Memon, "Effect of Water-Cement Ratio on Flexural Strength of RC Beams Made with Partial Replacement of Coarse Aggregates with Coarse Aggregates from Old Concrete," Engineering, Technology & Applied Science Research, vol. 9, no. 1, pp. 3826-3831, Feb. 2019. https://doi.org/10.48084/etasr.2499
B. A. Memon and A. H. Buller, "Recent Development on Use of Demolished Concrete as Coarse Aggregates," International Journal of Emerging Technology and Innovative Engineering, vol. 2, no. 1, pp. 1-11, Jan. 2016.
K. P. Verian, W. Ashraf, and Y. Cao, "Properties of recycled concrete aggregate and their influence in new concrete production," Resources, Conservation and Recycling, vol. 133, pp. 30-49, Jun. 2018. https://doi.org/10.1016/j.resconrec.2018.02.005
W. Kubissa, R. Jaskulski, A. Koper, and J. Szpetulski, "Properties of Concretes with Natural Aggregate Improved by RCA Addition," Procedia Engineering, vol. 108, pp. 30-38, Jan. 2015. https://doi.org/10.1016/j.proeng.2015.06.116
C. Zheng, C. Lou, G. Du, X. Li, Z. Liu, and L. Li, "Mechanical properties of recycled concrete with demolished waste concrete aggregate and clay brick aggregate," Results in Physics, vol. 9, pp. 1317-1322, Jun. 2018. https://doi.org/10.1016/j.rinp.2018.04.061
M. Abed and R. Nemes, "Long-term durability of self-compacting high-performance concrete produced with waste materials," Construction and Building Materials, vol. 212, pp. 350-361, Jul. 2019. https://doi.org/10.1016/j.conbuildmat.2019.04.004
H. Sasanipour and F. Aslani, "Effect of specimen shape, silica fume, and curing age on durability properties of self-compacting concrete incorporating coarse recycled concrete aggregates," Construction and Building Materials, vol. 228, Dec. 2019, Art. no. 117054. https://doi.org/10.1016/j.conbuildmat.2019.117054
R. K. Majhi, A. N. Nayak, and B. B. Mukharjee, "Development of sustainable concrete using recycled coarse aggregate and ground granulated blast furnace slag," Construction and Building Materials, vol. 159, pp. 417-430, Jan. 2018. https://doi.org/10.1016/j.conbuildmat.2017.10.118
O. Damdelen, "Investigation of 30% recycled coarse aggregate content in sustainable concrete mixes," Construction and Building Materials, vol. 184, pp. 408-418, Sep. 2018. https://doi.org/10.1016/j.conbuildmat.2018.06.149
M. Hayles, L. F. M. Sanchez, and M. Noel, "Eco-efficient low cement recycled concrete aggregate mixtures for structural applications," Construction and Building Materials, vol. 169, pp. 724-732, Apr. 2018. https://doi.org/10.1016/j.conbuildmat.2018.02.127
F. Kazemian, H. Rooholamini, and A. Hassani, "Mechanical and fracture properties of concrete containing treated and untreated recycled concrete aggregates," Construction and Building Materials, vol. 209, pp. 690-700, Jun. 2019. https://doi.org/10.1016/j.conbuildmat.2019.03.179
S. Ismail, W. H. Kwan, and M. Ramli, "Mechanical strength and durability properties of concrete containing treated recycled concrete aggregates under different curing conditions," Construction and Building Materials, vol. 155, pp. 296-306, Nov. 2017. https://doi.org/10.1016/j.conbuildmat.2017.08.076
S. Ali and S. Kacha, "Correlation among properties of no fines concrete-A review," presented at the National Conference on Applications of Nano Technology in Civil Engineering, Vadodara, India, Feb. 2017.
A. A. Yasin, "Investigation of Mechanical and Physical Properties of No-Fines Concrete," International Journal of Engineering Innovation & Research, vol. 4, no. 6, pp. 799-802, 2015.
P. Mounika and K. Srinivas, "Mechanical Properties of no Fines Concrete for Pathways," International Journal of Engineering and Techniques, vol. 4, no. 2, pp. 68-81, 2018.
A. R. Kalyane, A. Gujar, A. Jadhav, G. Agrawal, G. Mandora, and R. Mahajan, "Compressive Strength of No-Fines Concrete Compared to Conventional Concrete for Road Pavements," International Journal of Advance Research in Science and Engineering, vol. 6, no. 4, pp. 492-494, Apr. 2017.
G. Ravish and V. K. Ahuja, "No-Fine Concrete as a Road Pavement," International Journal of Engineering Trends and Technology, vol. 24, no. 4, pp. 187-190, 2015. https://doi.org/10.14445/22315381/IJETT-V24P235
A. Malik, "An Experimental Study on Properties of No-Fines Concrete," Imperial Journal of Interdisciplinary Research, vol. 2, no. 10, pp. 2075-2079, 2016.
K. S. Ushane, K. J. P. Kumar, and C. Kavitha, "Investigation of No-Fines Concrete in Building Blocks," International Journal of Structural and Civil Engineering Research, vol. 3, no. 4, pp. 170-177, 2014.
M. A. Alam and S. Naz, "Experimental Study on Properties of No-fine Concrete," International Journal of Informative and Futuristic Research, vol. 2, no. 10, pp. 3687-3694, Jun. 2015.
M. A. B. Kabir and Kh. Md. S. Islam, "Performance Study on No-Fines Concrete," in 3rd International Conference on Civil Engineering for Sustainable Development, Khulna, Bangladesh, Feb. 2016, pp. 848-854.
F. Tittarelli, A. Mobili, C. Giosue, and M. L. Ruello, "Sustainable and Durable No-fines Concrete for Vertical Applications," International Journal of Chemical, Environmental & Biological Sciences, vol. 1, no. 5, pp. 784-788, 2013.
K. B. Thombre, A. B. More, S. R. Bhagat, and pvpit bhavdhan pune, "Investigation of Strength and Workability in No-Fines Concrete," International Journal of Engineering Research & Technology, vol. 5, no. 9, pp. 390-393, Sep. 2016. https://doi.org/10.17577/IJERTV5IS090206
L. JiaHao, F. C. Lian, F. Hejazi, and N. Azline, "Study of properties and strength of no-fines concrete," IOP Conference Series: Earth and Environmental Science, vol. 357, Nov. 2019, Art. no. 012009. https://doi.org/10.1088/1755-1315/357/1/012009
I. Gorgis, W. F. Abd, and S. Al-Mishhadani, "Acidic solution effects on no-fines concrete produced by using recycled concrete as coarse aggregate," MATEC Web of Conferences, vol. 162, 2018, Art. no. 02002. https://doi.org/10.1051/matecconf/201816202002
P. S. Patil, I. Sonar, and S. Shinde, "No Fine Concrete," International Journal of Concrete Technology, vol. 3, no. 2, pp. 18-30, Sep. 2017.
M. Mageswari, M. P. Karthikeyan, S. Pavithran, M. Rajkumar, and R. Govindarajan, "High Strength Permeable Pavement using no Fines Concrete," International Journal of Civil Engineering, vol. 3, no. 3, pp. 62-66, Mar. 2016. https://doi.org/10.14445/23488352/IJCE-V3I3P111
A. D. Ingle, A. R. Padmawar, T. R. Hirave, and D. Kumbhar, "No-Fines Concrete by using Cellulose Fiber," International Journal of Innovative Research in Science and Engineering, vol. 3, no. 4, pp. 253-259, 2017.
F. Monika, H. Prayuda, B. Zega, and M. D. Cahyati, "Flexural and Compressive Strength on No-fines Concrete Slab using Variations of Fly Ash and Superplasticizer," International Journal of Integrated Engineering, vol. 11, no. 9, pp. 275-284, Dec. 2019.
M. A. Memon, M. A. Bhutto, N. A. Lakho, I. A. Halepoto, and A. N. Memon, "Effects of Uncrushed Aggregate on the Mechanical Properties of No-Fines Concrete," Engineering, Technology & Applied Science Research, vol. 8, no. 3, pp. 2882-2886, Jun. 2018. https://doi.org/10.48084/etasr.1976
A. M. Bravo-German, I. D. Bravo-Gomez, J. A. Mesa, and A. Maury-Ramirez, "Mechanical Properties of Concrete Using Recycled Aggregates Obtained from Old Paving Stones," Sustainability, vol. 13, no. 6, Jan. 2021, Art. no. 3044. https://doi.org/10.3390/su13063044
S. A. Salih, I. N. Gorgis, and W. F. Abd, "Some Properties of No-Fines Concrete Produced by Using Demolished Concrete as Recycled Coarse Aggregate," Engineering and Technology Journal, vol. 35, no. 7, pp. 741-748, 2017.
G.-F. Peng, Y.-Z. Huang, H.-S. Wang, J.-F. Zhang, and Q.-B. Liu, "Mechanical Properties of Recycled Aggregate Concrete at Low and High Water/Binder Ratios," Advances in Materials Science and Engineering, vol. 2013, Dec. 2013, Art. no. e842929. https://doi.org/10.1155/2013/842929
Z. A. Tunio, B. A. Memon, N. A. Memon, N. A. Lakho, M. Oad, and A. H. Buller, "Effect of Coarse Aggregate Gradation and Water-Cement Ratio on Unit Weight and Compressive Strength of No-fines Concrete," Engineering, Technology & Applied Science Research, vol. 9, no. 1, pp. 3786-3789, Feb. 2019. https://doi.org/10.48084/etasr.2509
How to Cite
MetricsAbstract Views: 375
PDF Downloads: 203
Copyright (c) 2021 S. A. Dahri, B. A. Memon, M. Oad, R. Bhanbhro, Ihsan Ali Rahu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.