Sediment Transport Dynamics in the Upper Nara Canal Off-taking from Sukkur Barrage of Indus River
Sediment material transported by the Indus River has two origins, the catchment and its wetted perimeter, whereas the amount of materials transported from the river itself depends on variables such as the flow type and the sediment load. The annual sediment load transported in the Indus River ranged from 270 to 600 million tons (MT) before the building of dams and barrages. The average sediment load is 0.715 MT/day or approximately 260 MT/ year after the construction of hydraulic structures. The average particle size, D50, of the bedload is approximately 0.125mm at the Sukkur barrage . In this study, research was conducted to evaluate sediment problems in the Nara Canal, take-off from the left pocket of the Sukkur Barrage on the Indus River. The collected data from the left pocket, the bed, and suspended material in upper Nara and its off-taking canals were analyzed to assess sediment transport dynamics of upper Nara canal at various locations and its off-taking canals. The bed material at RD 553+600 shows a minimum size of 0.07 and a maximum of 0.7mm with 54% fine-sand mixed with 46% medium-sand in 2003. Fine-sand increased to an average of 75% while medium sand diminished to 25% at RD 553+600 in Nara canal and at RD 595+000 in Jamrao complex in 2013. The suspended load with low and high flows during 2012 exhibits that in all the cases the sand proportion was increasing in the Upper Nara canal system flowing to the Jamrao complex. The sediment concentration value indicates that there is the deposition of sand at the upper Nara canal and the Jamrao complex causing a discharge reduction in the Nara Canal system.
Keywords:Indus River, Nara canal, sediment transport dynamics, silt deposition, irrigation system
H. R. Wallingford, "Sukkur Barrage Morphological Studies," EX 6847 R2, Sep. 2012.
J. D. Milliman and J. P. M. Syvitski, "Geomorphic/Tectonic Control of Sediment Discharge to the Ocean: The Importance of Small Mountainous Rivers," The Journal of Geology, vol. 100, no. 5, pp. 525-544, Sep. 1992. DOI: https://doi.org/10.1086/629606
J. F. Shroder Jr, "Morphohlogy and Dynamics of the Indus River: Implications for the Mohen Jo Daro Site," in Himalaya to the Sea: Geology, Geomorphology and the Quaternary, Taylor & Francis Group, 2002.
A. Ali, Indus Basin Floods: Mechanisms, Impacts, and Management. ADB, 2013.
C. M. White and G. I. Taylor, "The equilibrium of grains on the bed of a stream," Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol. 174, no. 958, pp. 322-338, Feb. 1940. DOI: https://doi.org/10.1098/rspa.1940.0023
Sindh Barrages Improvement Project - Sukkur Barrage Rehabilitation and Modernization. Sindh, Pakistan: Government of Sindh, Pakistan Irrigation Department, 2017.
R. Galappatti, "A depth integrated model for suspended transport," Communications on Hydraulics, vol. 1983, no. 7, 1983.
S. Munir, Role of Sediment Transport in Operation and Maintenance of Supply and Demand Based Irrigation Canals: Application to Machai Maira Branch Canals, 1st edition. Leiden: Routledge, 2011. DOI: https://doi.org/10.1201/b11604
A. Agrawal, "Numerical Modelling of Sediment Flow in Tala Desilting Chamber," M.S. thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2005.
S. Haun and N. R. B. Olsen, "Three-dimensional numerical modelling of the flushing process of the Kali Gandaki hydropower reservoir," Lakes & Reservoirs: Science, Policy and Management for Sustainable Use, vol. 17, no. 1, pp. 25-33, 2012. DOI: https://doi.org/10.1111/j.1440-1770.2012.00491.x
D. Lysne, B. Glover, H. Stole, and E. Tesaker, Hydraulic Design. Norwegian University of Science and Technology, 2003.
W. H. Graf, Fluvial Hydraulics: Flow and Transport Processes in Channels of Simple Geometry. New York, NY, USA: Wiley, 1998.
S. S. Ginsberg and S. Aliotta, "Sediment Transport Circulation Pattern through Mesotidal Channels System," Sediment Transport, Apr. 2011.
P. Frey and M. Church, "How river beds move," Science, vol. 325, no. 5947, pp. 1509-1510, 2009. DOI: https://doi.org/10.1126/science.1178516
A. Vabre, "Methodologies for design, operation and maintenance of irrigation canals subject to sediment problems application to Pakistan," IIMI, Pakistan National Program, ISRIP, CEMAGREF, Lahore, Pakistan, 1996.
J. M. Turowski, D. Rickenmann, and S. J. Dadson, "The partitioning of the total sediment load of a river into suspended load and bedload," presented at the EGU General Assembly 2009, Vienna, Austria, Apr. 2009.
X. Wang, Q. Yang, W. Lu, and X. Wang, "Effects of Bed Load Movement on Mean Flow Characteristics in Mobile Gravel Beds," Water Resources Management, vol. 25, no. 11, Jun. 2011, Art. no. 2781. DOI: https://doi.org/10.1007/s11269-011-9838-6
K. P. Paudel, Role of Sediment in the Design and Management of Irrigation Canals: UNESCO-IHE PhD Thesis, 1st ed. CRC Press, 2010.
Water Sector Improvement Project (WSIP), (2015), "Impact on sediment transport due to developments in Nara canal", Monitoring and Evaluation Report, Sindh Irrigation and Drainage Authority.
F. G. Sarwar, "Sediment Characteristics and Transportation Dynamics of Upper Nara Canal," M.S. thesis, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan, 2016.
S. Singh, S. Rai, and S. Krishnaswami, "Sr and Nd isotopes in river sediments from the Ganga Basin: Sediment provenance and spatial variability in physical erosion," Journal of Geophysical Research-Earth Surface, vol. 113, no. F3, Jul. 2008, Art. no. F03006. DOI: https://doi.org/10.1029/2007JF000909
A. A. Mahessar, A. L. Qureshi, A. N. Laghari, S. Qureshi, S. F. Shah, and F. A. Shaikh, "Impact of Hairdin, Miro Khan and Shahdad Kot Drainage on Hamal Dhand, Sindh," Engineering, Technology & Applied Science Research, vol. 8, no. 6, pp. 3652-3656, Dec. 2018. DOI: https://doi.org/10.48084/etasr.2389
A. A. Mahessar, K. Ansari, G. M. Arain, S. M. Kori, S. Qureshi, and A. L. Qureshi, "Impact of Right Bank Outfall Drain-I (RBOD-I) / Main Nara Valley Drain (MNVD) on Manchar Lake, Sindh, Pakistan," Engineering, Technology & Applied Science Research, vol. 9, no. 6, pp. 5074-5079, Dec. 2019. DOI: https://doi.org/10.48084/etasr.3219
How to Cite
MetricsAbstract Views: 371
PDF Downloads: 248
Copyright (c) 2020 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.