Comparative Study of the Electrical Characteristics of Different Photovoltaic Modules in Outdoor Environment
The electrical characteristics of photovoltaic (PV) modules are affected by solar radiation and module temperature in outdoor environment. It was found that polycrystalline gained a yearly 0.50°C more average module temperature than monocrystalline. Non-crystalline amorphous modules got a yearly 0.83°C more average temperature than thin film modules. The attainment and release of module temperature was related with material properties of PV module technologies. The amorphous module gave 5.7%, 2.7% and 15.0% more yearly average open-circuit voltage than polycrystalline, monocrystalline and thin film modules. Besides that, the thin film modules gave 6.5% and 1.7%, 9.3% and 4.0%, and 11.3% and 8.8% more yearly average normalized short-circuit current and power output than polycrystalline, monocrystalline and thin film modules respectively. It was shown that the maximum annual average open-circuit voltage was given by amorphous modules and maximum short-circuit current and power output by thin film modules during the study period.
S. A. Kalogirou, Solar Energy Engineering: Processes and Systems, Academic Press, 2014
J. A. Duffie, W. A. Beckman, Solar Engineering of Thermal Processes, Wiley, 2013
S. R. Shakeel, J. Takala, W. Shakeel, “Renewable energy sources in power generation in Pakistan”, Renewable and Sustainable Energy Reviews, Vol. 64, pp. 421-434, 2016
A. Q. Jakhrani, S. R. Samo, S. A. Kamboh, J. Labadin, A. R. H. Rigit, “An improved mathematical model for computing power output of solar photovoltaic modules”, International Journal of Photoenergy, Vol. 2014, Article ID 346704, 2014
E. Skoplaki, J. A. Palyvos, “On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations”, Solar Energy, Vol. 83, No. 5, pp. 614-624, 2009
A. Ibrahim, “Analysis of electrical characteristics of photovoltaic single crystal silicon solar cells at outdoor measurements”, Smart Grid and Renewable Energy, Vol. 2, pp. 169-175, 2011
A. Q. Malik, S. J. B. H. Damit, “Outdoor testing of single crystal silicon solar cells”, Renewable Energy, Vol. 28, No. 9, pp. 1433-1445, 2003
A. Q. Jakhrani, A. K. Othman, A. R. H. Rigit, S. R. Samo, “Determination and comparison of different photovoltaic module temperature models for Kuching, Sarawak”, IEEE Conference on Clean Energy and Technology, Kuala Lumpur, Malaysia, June 27-29, 2011
Y. Du, C. J. Fell, B. Duck, D. Chen, K. Liffman, Y. Zhang, M. Gu, Y. Zhu, “Evaluation of photovoltaic panel temperature in realistic scenarios”, Energy Conversion and Management, Vol. 108, pp. 60-67, 2016
E. Skoplaki, A. G. Boudouvis, J. A. Palyvos, “A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting”, Solar Energy Materials and Solar Cells, Vol. 92, No. 11, pp. 1393-1402, 2008
P. Arjyadhara, S. M. Ali, J. Chitralekha, “Analysis of solar PV cell performance with changing irradiance and temperature”, International Journal of Engineering and Computer Science, Vol. 2, No. 1, pp. 214-220, 2013
T. Yamaguchi, M. Kawakami, K. Kitano, S. Nakagawa, T. Tokoro, T. Nakano, H. Ohyama, “Data analysis on performance of PV system installed in south and north directions”, IEEE 3rd World Conference on Photovoltaic Energy Conversion, 2003, Osaka, Japan, May 11-18, 2003
V. Eveloy, P. Rodgers, S. Bojanampati, “Enhancement of photovoltaic solar module performance for power generation in the Middle East”, 28th IEEE Annual Semiconductor Thermal Measurement and Management Symposium, San Jose, USA, March 18-22, 2012
M. A. Bashir, H. M. Ali, S. Khalil, M. Ali, A. M. Siddiqui, “Comparison of performance measurements of photovoltaic modules during winter months in Taxila, Pakistan”, International Journal of Photoenergy, Vol. 2014, Article ID 898414, 2014
S. E. T. Moghaddam, S. M. Kankanani, “Numerical simulation of a mechanically stacked GaAs/Ge solar cell”, Engineering, Technology & Applied Science Research, Vol. 7, No. 3, pp. 1611-1614, 2017
F. Mavromatakis, G. Viskadouros, H. Haritaki, G. Xanthos, “Photovoltaic systems and net metering in Greece”, Engineering, Technology & Applied Science Research, Vol. 8, No. 4, pp. 3168-3171, 2018
P. Salami, Y. Ajabshirchi, S. Abdollahpoor, H. Behfar, “A comparison among different parameters for the design of a photovoltaic/thermal system using computational fluid dynamics”, Engineering, Technology & Applied Science Research, Vol. 6, No. 5, pp. 1119-1123, 2016
M. Sojoudi, R. Madatov, T. Sojoudi, P. Farhadi, “Achieving steady and stable energy from AlGaAsGaAs solar cells”, Engineering, Technology & Applied Science Research, Vol. 1, No. 6, pp. 151-154, 2011
A. Q. Jakhrani, A. R. Jatoi, M. M. Jakhrani, A. N. Laghari, S. A. Kamboh, “Appraisal of climatic conditions for potential solar energy applications in Nawabshah and Quetta Cities”, Engineering, Technology & Applied Science Research, Vol. 9, No. 1, pp. 3711-3714, 2019
A. R. Jatoi, S. R. Samo, A. Q. Jakhrani, “Influence of Temperature on Electrical Characteristics of Different Photovoltaic Module Technologies”, International Journal of Renewable Energy Development, Vol. 7, No. 2, pp. 85-91, 2018
A. R. Jatoi, S. R. Samo, A. Q. Jakhrani, “Influence of ambient temperature and solar radiations on photovoltaic module’s temperature and power output”, International Journal of Natural and Engineering Science, Vol. 10, No. 2, pp. 43-47, 2016
B. J. Huang, P. E. Yang, Y. P. Lin, B. Y. Lin, H. J. Chen, R. C. Lai, J. S. Cheng, “Solar cell junction temperature measurement of PV module”, Solar Energy, Vol. 85, No. 2, pp. 388-392, 2011
MetricsAbstract Views: 202
PDF Downloads: 115 Cover letter Downloads: 0
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.
Most read articles by the same author(s)
- A. Q. Jakhrani, A. R. Jatoi, M. M. Jakhrani, A. N. Laghari, S. A. Kamboh, Appraisal of Climatic Conditions for Potential Solar Energy Applications in Nawabshah and Quetta Cities , Engineering, Technology & Applied Science Research: Vol. 9 No. 1 (2019): February, 2019
- S. H. Solangi, A. Q. Jakhrani, K. C. Mukwana, A. R. Jatoi, M. R. Luhur, Investigation of Quantity, Quality and Energy Content of Indigenous Sugarcane Trash in Naoshehro Feroze District, Sindh , Engineering, Technology & Applied Science Research: Vol. 8 No. 6 (2018): December, 2018