Surface Discharges and Flashover Voltages in Nanocomposite XLPE Samples
DC cable insulation is a field of intensive research activity. Special attention is being given to polymer nanocomposites, as promising insulation for such cables. Relatively little is known regarding surface discharges and flashover voltages for the aforementioned materials. In this paper, a comparison is made between samples of cross-linked polyethylene insulation with added MgO nanofillers and samples of pure polyethylene w.r.t. the behavior of surface discharges and flashover voltages in arrangements of water droplets of various conductivities on the said polymeric surfaces under the influence of uniform electric fields. Experimental evidence indicates that the flashover voltages of XLPE with MgO nanofillers are higher that the ones obtained with pure PE.
Keywords:discharge, flashover, cable, XPLE, nanocomposite
C. W. Reed, “An assessment of material selection for high voltage DC extruded polymer cables”, IEEE Electrical Insulation Magazine, Vol. 33, No. 4, pp. 22-26, 2017 DOI: https://doi.org/10.1109/MEI.2017.7956629
T. Andritsch, A. Vaughan, G. C. Stevens, “Novel insulation materials for high voltage cable systems”, IEEE Electrical Insulation Magazine, Vol. 33, No.4, pp. 27-33, 2017 DOI: https://doi.org/10.1109/MEI.2017.7956630
G. Melissinos, M. Danikas, “On Polymers Nanocomposites: Electrical Treeing, Breakdown models and Related Simulations”, Engineering, Technology & Applied Science Research, Vol. 8, No. 2, pp. 2627-2632, 2018 DOI: https://doi.org/10.48084/etasr.1726
S. C. Kechagia, M. G. Danikas, R. Sarathi, “Water droplets and breakdown phenomena on polymer nanocomposite surfaces under the influence of uniform electric fields”, Malaysian Polymer Journal, Vol. 8, No. 2, pp. 41-47, 2013
F. Obenaus, “Fremdschichtueberschlag und Kriechweglaenge”, Elektrotechnik, Vol. 4, pp. 135-137, 1958
M. Kozako, R. Kido, N. Fuse, Y. Ohki, T. Okamoto, “Difference in surface degradation due to partial discharges between polyamide nanocomposite and microcomposite”, IEEE 2004 Annual Report of Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp. 398-401, 2004
M. Kozako, R. Kido, T. Imai, T. Ozaki, T. Shmizu, T. Tanaka, “Surface roughness change of epoxy/TiO2 nanocomposites due to partial discharges”, International Symposium on Electrical Insulating Materials, Japan, pp. 661-664, 2005 DOI: https://doi.org/10.1109/ISEIM.2005.193456
C. Charalambous, M. G. Danikas, Y. Yin, N. Vordos, J. W. Nolan, A. Mitropoulos, “Study of the behavior of water droplets under the influence of a uniform electric field on conventional polyethylene and on crosslinked polyethylene (XLPE) with MgO nanoparticles samples”, Engineering, Technology & Applied Science Research, Vol. 7, No. 1, pp. 1323-1328, 2017 DOI: https://doi.org/10.48084/etasr.813
P. Prabhu, M. J. Thomas, “Influence of nanofillers on the surface electrical discharge resistance of epoxy insulation in HV apparatus”, International Journal on Emerging Electrical Power Systems, Vol. 12, No. 4, DOI: 10.2202/1553-779X.2706, 2011 DOI: https://doi.org/10.2202/1553-779X.2706
R. Sarathi, A. K. Sahoo, Y. Chen, T. Tanaka, “Underrstanding surface discharge activity with epoxy silicon carbide nanocomposites”, Polymer Engineering & Science, Vol. 57, No. 12, pp. 1349-1355, 2017 DOI: https://doi.org/10.1002/pen.24518
A. B. Poda, R. Dhara, Md. Afzalur Rab, P. Basappa, “Evaluation of aging in nanofilled polypropylene by surface discharges”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 23, No. 1, pp. 275-287, 2016 DOI: https://doi.org/10.1109/TDEI.2015.004773
P. A. Sharad, K. S. Kumar, “Application of surface modified XLPE nanocomposites for electrical insulation – partial discharge and morphological study”, Nanocomposites, Vol. 3, No. 1, pp. 30-41, 2017 DOI: https://doi.org/10.1080/20550324.2017.1325987
Y. Z. Lv, Y. Zhou, C. R. Li, K. B. Ma, Q. Wang, W. Wang, S. N. Zhang, Z. Y. Zin, “Nanoparticle effects on creeping flashover characteristics of oil/pressboard interface”, IEEE Transactions on Dielectrics and Electrical Insul.ation, Vol. 21, No. 2, pp. 556-562, 2014 DOI: https://doi.org/10.1109/TDEI.2013.004151
How to Cite
MetricsAbstract Views: 574
PDF Downloads: 397
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.