Elastic and Deformation Characteristics of MSWI Bottom Ash for Road Construction
Bottom ash from Municipal Solid Waste Incineration (MSWI) is a typical granular material resulting from the incineration of domestic waste. It is mainly used in road engineering substituting traditional natural aggregates. As the characterization of the mechanical behavior is essential, the work presented in this paper pursues the study of the elastic and deformation characteristics of bottom ash, in particular Young’s modulus and Poisson’s ratio. From the consolidated-drained triaxial test data, it was possible to extract fundamental material parameters about the samples, including their Young’s modulus E0.2 and E50, its Poisson’s ratio ν, and its maximum deviatoric stress peak. These parameters were then used in computer models to predict how the bottom ash will behave in a larger-scale engineering application. Furthermore, the mechanical behavior of bottom ash related to road construction’s loading condition, especially the secant modulus, was detailed.
ADEME and BRGM, Mâchefers d'incinérations des ordures ménagères - États de l'art et perspectives: États de l'art et perspectives. Paris: DUNOD, 2008.
ITOM: Les installations de traitement des ordures. Angers, France: ADEME, 2010.
F. Becquart, "Comportement mécanique au triaxial d'un mâchefer d'incinération d'ordures ménagères," European Journal of Environmental and Civil Engineering, vol. 12, no. 6, pp. 673-686, Jun. 2008. DOI: https://doi.org/10.1080/19648189.2008.9693038
F. Becquart, F. Bernard, N. E. Abriak, and R. Zentar, "Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction," Waste Management, vol. 29, no. 4, pp. 1320-1329, Apr. 2009. DOI: https://doi.org/10.1016/j.wasman.2008.08.019 DOI: https://doi.org/10.1016/j.wasman.2008.08.019
N. Bheel, M. A. Jokhio, J. A. Abbasi, H. B. Lashari, M. I. Qureshi, and A. S. Qureshi, "Rice Husk Ash and Fly Ash Effects on the Mechanical Properties of Concrete," Engineering, Technology & Applied Science Research, vol. 10, no. 2, pp. 5402-5405, Apr. 2020. DOI: https://doi.org/10.48084/etasr.3363 DOI: https://doi.org/10.48084/etasr.3363
M. Izquierdo, E. Vazquez, X. Querol, M. Barra, A. Lopez, and F. Plana, "Use of bottom ash from municipal solid waste incineration as a road material," presented at the 2001 International Ash Utilization Symposium, Center for Applied Energy Research, Kentucky, KY, 2001, Art. No. 37.
N. Radwan and S. A. Mangi, "Municipal Solid Waste Management Practices and Opportunities in Saudi Arabia," Engineering, Technology & Applied Science Research, vol. 9, no. 4, pp. 4516-4519, Aug. 2019. DOI: https://doi.org/10.48084/etasr.2870 DOI: https://doi.org/10.48084/etasr.2870
H. Maniam, S. Nagapan, A. H. Abdullah, S. Subramaniam, and S. Sohu, "A Comparative Study of Construction Waste Generation Rate Based on Different Construction Methods on Construction Project in Malaysia," Engineering, Technology & Applied Science Research, vol. 8, no. 5, pp. 3488-3491, Oct. 2018. DOI: https://doi.org/10.48084/etasr.2340 DOI: https://doi.org/10.48084/etasr.2340
S. Nagapan et al., "Preliminary Survey on the Crucial Root Causes of Material Waste Generation in Malaysian Construction Industry," Engineering, Technology & Applied Science Research, vol. 8, no. 6, pp. 3580-3584, Dec. 2018. DOI: https://doi.org/10.48084/etasr.2388 DOI: https://doi.org/10.48084/etasr.2388
B. R. Broujeni, G. A. Omrani, R. Naghavi, and S. S. Afraseyabi, "Construction and Demolition Waste Management (Tehran Case Study)," Engineering, Technology & Applied Science Research, vol. 6, no. 6, pp. 1249-1252, Dec. 2016. DOI: https://doi.org/10.48084/etasr.812 DOI: https://doi.org/10.48084/etasr.812
S. A. Chandio, B. A. Memon, M. Oad, F. A. Chandio, and M. U. Memon, "Effect of Fly Ash on the Compressive Strength of Green Concrete," Engineering, Technology & Applied Science Research, vol. 10, no. 3, pp. 5728-5731, Jun. 2020. DOI: https://doi.org/10.48084/etasr.3499 DOI: https://doi.org/10.48084/etasr.3499
R. Forteza, M. Far, C. Seguı́, and V. Cerdá, "Characterization of bottom ash in municipal solid waste incinerators for its use in road base," Waste Management, vol. 24, no. 9, pp. 899-909, Jan. 2004. DOI: https://doi.org/10.1016/j.wasman.2004.07.004 DOI: https://doi.org/10.1016/j.wasman.2004.07.004
M. Izquierdo, Á. López‐Soler, E. V. Ramonich, M. Barra, and X. Querol, "Characterisation of bottom ash from municipal solid waste incineration in Catalonia," Journal of Chemical Technology & Biotechnology, vol. 77, no. 5, pp. 576-583, 2002, doi: 10.1002/jctb.605. DOI: https://doi.org/10.1002/jctb.605 DOI: https://doi.org/10.1002/jctb.605
M.-C. Weng, C.-L. Lin, and C.-I. Ho, "Mechanical properties of incineration bottom ash: The influence of composite species," Waste Management, vol. 30, no. 7, pp. 1303-1309, Jul. 2010. DOI: https://doi.org/10.1016/j.wasman.2009.11.010 DOI: https://doi.org/10.1016/j.wasman.2009.11.010
F. Becquart, "Comportement mécanique au triaxial d'un mâchefer d'incinération d'ordures ménagères," European Journal of Environmental and Civil Engineering, vol. 12, no. 6, pp. 673-686, Jun. 2008. DOI: https://doi.org/10.1080/19648189.2008.9693038 DOI: https://doi.org/10.1080/19648189.2008.9693038
N. Le, N. E. Abriak, C. Binetruy, M. Benzerzour, and S. Chaki, "The study of behavior of bottom ash under homogeneous stresses. Determination of parameters for Nova behavior models," presented at the Euromediterranean Symposium on Advances in Geomaterials and Structures, Djerba, Tunisia.
Acceptabilité environnementale de matériaux alternatifs en technique routière: Les mâchefers d'incinération de déchets non dangereux. Paris, France: Setra, 2012.
Réalisation des remblais et des couches de forme: Fascicule I : Principes generaux, 2nd ed. Paris, France: Setra, 2000.
N. Lapa, R. Barbosa, J. Morais, B. Mendes, J. Méhu, and J. F. Santos Oliveira, "Ecotoxicological assessment of leachates from MSWI bottom ashes," Waste Management, vol. 22, no. 6, pp. 583-593, Oct. 2002. DOI: https://doi.org/10.1016/S0956-053X(02)00009-0 DOI: https://doi.org/10.1016/S0956-053X(02)00009-0
T. Schanz and P. A. Vermeer, "Angles of friction and dilatancy of sand," Géotechnique, vol. 46, no. 1, pp. 145-151, Mar. 1996. DOI: https://doi.org/10.1680/geot.19220.127.116.11 DOI: https://doi.org/10.1680/geot.1918.104.22.168
EN 13286-2:2004. Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction. CEN, 2004.
D. M. Wood, Soil Behaviour and Critical State Soil Mechanics. Cambridge, UK: Cambridge University Press, 1990. DOI: https://doi.org/10.1017/CBO9781139878272 DOI: https://doi.org/10.1017/CBO9781139878272
T. W. Lambe and R. V. Whitman, Soil Mechanics. Hoboken, NJ, USA: John Wiley & Sons, 1991.
T. L. Nguyen, "Etude expérimentale de la loi d'écoulement de matériaux anisotropes tranverses," Ph.D. dissertation, École Nationale des Ponts et Chaussées, 2008.
B. M. Das and K. Sobhan, Principles of Geotechnical Engineering, 8th ed. Cengage Learning, 2012.
M. R. B. Cox, "The Influence of Grain Shape on Dilatancy," Ph.D. dissertation, University of Arizona, Tucson, AZ, 2008.
G. Ranjan and A. S. R. Rao, Basic and Applied Soil Mechanics, 2nd ed. New Delhi, India: New Age International, 2000.
MetricsAbstract Views: 321
PDF Downloads: 209
Copyright (c) 2020 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) after its publication in ETASR with an acknowledgement of its initial publication in this journal.